Operation Manual

English
55
MODIFICATIONS
Hitachi Power Tools are constantly being improved
and modified to incorporate the latest technological
advancements.
Accordingly, some parts (i.e. code numbers and/or
design) may be changed without prior notice.
NOTE:
Due to HITACHI’s continuing program of reserch and
development, the specifications herein are subject to
change without prior notice.
Information concerning airborne noise and vibration
The measured values were determined according to
EN60745 and declared in accordance with ISO 4871.
Measured A-weighted sound power level:
WH14DSL: 102 dB (A)
WH18DSL: 102 dB (A)
Measured A-weighted sound pressure level:
WH14DSL: 91 dB (A)
WH18DSL: 91 dB (A)
Uncertainty KpA: 3 dB (A).
Wear ear protection.
Vibration total values (triax vector sum) determined
according to EN60745.
Impact tightening of fasteners of the maximum capacity
of the tool:
Vibration emission value
ah = WH14DSL: 18.8 m/s
2
WH18DSL: 18.8 m/s
2
Uncertainty K = WH14DSL: 3.7 m/s
2
WH18DSL: 3.7 m/s
2
WARNING
䡬 The vibration emission value during actual use of the
power tool can differ from the declared value
depending on the ways in which the tool is used.
䡬 To identify the safety measures to protect the operator
that are based on an estimation of exposure in the
actual conditions of use (taking account of all parts of
the operating cycle such as the times when the tool is
switched off and when it is running idle in addition to
the trigger time).
05Eng_WH14DSL_NE 11/14/08, 18:2055