Manual

Use the built-in camera light it you wish to shoot objects in dark places. When the

"LIGHT" switch is set to "AUTO", the camera light turns on automatically when the

camera/recorder is pointed at objects in a dark place and turns off when it is pointed at

objects in a bright place.

_dee dpOwer consumption of the built-in camera light is about a half that of the 1

r: Therefore, if the camera light is turned on when a fullY charged battery

, the operating time of the battery falls to about a half.

1. Make sure that a fully charged battery pack or AC adaptor/charger is attached.

2. Set the "POWER" switch to "CAM" and then set the "LIGHT" switch to "AUTO"

when required.

NOTE: When the "LIGHT" switch is set on "ON". the camera light will turn on whenever

you make a recording.

CAUTION:

• Turn the camera light on only when you need it, otherwise the operating time of the

battery pack is shortened due to the power consumption of the camera light.

• When the "LIGHT" switch is set to "AUTO". the camera light does not turn on unless a

cassette is loaded.

CAUTION: Do not hold the unit by the built-in camera lignt when carrying as this could

cause a malfunction.

3. After use, set the "LIGHT" switch to "OFF" or set the "POWER" switch of the

camera/recorder to "OFF" position.