Manual

The audio dubbing feature lets you record new audio (sound) on a previously recorded

tape without erasing the original video.

When you audio dub a tape, the previous audio is erased and replaced with new sound.

' Sound from the built.in microphone and the AUDIO jack can be dubbed.

, When dubbing audio from the bui!t-in mici0phonel Set AV OUT/IN' switch to !'OUT' and

do not connect the ',AUDIO,, jacki When dubbing audio from the !!AUDIO,, jackl set the

"AM OUT/IN "switch to !!IN,:

1. Insert a recorded tape. Be sure that the record safety tab is not missing.

2. Place "POWER" switch to "VIDEO" position.

3. Play the tape and press "REC/PAUSE" button where you want to dub audio.

• The camera/recorder enters the still play mode.

4. Press "DUBBING AUDIONIDEO" and "PLAY" buttons at the same time.

• "A.DUB -" appears in the viewfinder.

NOTE: If "DUBBING AUDIONIDEO" and "PLAY" buttons are pressed twice, audio

and video dubbing will start. In this case. press "STOP/EJECT" button to release the

dubbing mode.

5. Press "RECORD/PAUSE" button to start audio dubbing.

6. Press "STOP/EJECT" button to stop audio dubbing.

I NOTE: If counter memory "M" appears in the Viewfinder, the tape stops automatically at

the reading of !,o:oo:oo" and aUdi0 dubbing