: TABLE OF CONTENTS " _HITACHI Instruction Manual Video Camera/Recorder VM-3700A Hitachi Home Electronics INC. (America), Inc. 3890 Steve Reynolds Blvd., Norcross, GA 30093 Pointe Claire, Tel. 404-279-5600 HITACHI SALES CORPORATION OF HAWAII, INC. 3219 Koapaka Street, Honolulu, HI 96819 Tel. 808-836-3621 P QR10511 @Hitachi, Ltd. 1994 KS-M(N) HITACHI (HSC) CANADA 3300 Trans Canada Quebec, H9RIB1, Tel. 514-697-9150 Hwy.
TABLE OF CONTENTS ............................................................................................................................ WARNINGS ............................................................................................................................................... PRECAUTIONS ......................................................................................................................................... PRECAUTIONS ......................................................
Recording titles on a tape in the camera/recorder .................................................................... Recording titles on another VCR while playing a tape back with the camcorder .................. Chart of characters available in the titler .................................................................................... RECORDING TV PROGRAMS AUDIO DUBBING AUDIO AND .............................................................................................................. ....
WARNING: TO PREVENT FIRE OR ELECTRIC THIS APPLIANCE TO RAIN OR MOISTURE. SHOCK. DO NOT EXPOSE !r i-_This symbol warns the user that uninsulated voltage within the unit may have sufficient magnitude to cause electric shock. Therefore. it is dangerous to make any kind of contact with any inside part of this unit. rmbol alerts the user that important literature operation and maintenance of this unit has been included. should be read carefully in order to avoid any problems.
:: WARNINGS television reception, which can be determined by turning the equipment off and on. the user is encouraged to try to correct by one or more of the following measures: --Reorient or relocate the receiving antenna. --Increase the separation between the equipment and the receiver. --Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. --Consult the dealer or an experienced radio/TV technician for help.
Thank you for choosing the _ video camera/recorder. For maximum pleasure convenience please read these simple instructions before operating your camera/recorder. Any problems that occur as a result of any of the following by our warranty. conditions and will not be covered Be careful that no water, dust, or sand enters the camera/recorder. When you are not using the camera/recorder, switch off the power and attach the lens cap.
• Digital zoom up to X24 • Solid-state camera pickup i_ High Quality picture technology Auto focus power zoom lens with macro feature Full record and playback capability with standard _! cassette Program AE (Auto Exposure) Fade in/fade out Color electronic viewfinder (EVF) Flying erase head Time and date Titler Index signal Audio/video dub Audio dub Built-in camera light i * HQi This video camera/recorder quality picture technology bearing the _ mark.
In addition to the careful attention devoted to quality standards in the manufacture of your video product, safety is a major factor in the design of every instrument. But, safety is your responsibility too. This page lists important information that will help to assure your enjoyment and proper use of a Video Camera/Recorder and accessory equipment. Please read it carefully before operating your video product and keep it in a handy place for future reference.
and have it replaced by your service technician if appearance indicates damage or deteriorated insulation. 7 Power Cord Protection -- Power supply cords should be routed so that they are not likely to be walked on or pinched by items placed upon or against them, paying particular attention to cords at plugs, convenience receptacles, and the point where they exit from the appliance.
11 Accessories -- Do not place this video product on an unstable card, stand, tripod, bracket or table. The video product may fall, causing serious injury to a child or adult, and serious damage to the appliance. Use only with a cart, stand, tripod, bracket or table recommended by the manufacturer, or sold with the video product. Any mounting of the product should follow the manufacturer's instructions, and should use a mounting accessory recommended by the manufacturer.
i IMPORTANT SAFEGUARDS i SERVICE 17 Servicing -- Do not attempt to service this video product yourself as opening or removing covers may expose you to dangerous voltage or other hazards. Refer all servicing to qualified service personnel. 18 Conditions Requiring Service -- Unplug this video product from the wall outlet and refer servicing to qualified service personnel under the following conditions. a. When the power-supply cord or plug is damaged b.
1. Save these instructions - This page contains important safety and operating instructions for AC Adaptor/Charger Model VM-AC68A (T) 2. Before using AC Adaptor/Charger, read all instructions and cautionary markings (1) AC Adaptor/Charger, (2) battery and (3) product using battery. 3. Also read all instructions on pages 4 and 5. on 4. Caution-'To reduce the risk of injury, charge only rechargeab!e battery, VM_BP64/BP65! BP66/BP67: Other types of batteries may burst causing personal injury and damage.
"Note to CATV system installer: This reminder is provided to call the CATV system installer's attention to Article 820-40 of the NEC that provides guidelines for proper grounding and. in particular, specifies that the cable ground shall be connected to the grounding system of the building as close to the point of cable entry as practical".
Set the viewfinder to the position shown in the figure when carrying the camcorder or storing it in the carrying case. Turn the viewfinder to the position shown below when shooting pictures. 1. Turn the viewfinder ! 2. Turn the eyepiece. You can adjust the position easily.
i ELECTRONIC VtEWFINDER :: ]5
• To attach, align the mark "_" of the battery with that of the camera/recorder so that the battery fits into the groves, and slide the battery downward, as illustrated. r / • To remove the battery: Push and hold "Battery" release lever, then slide the battery to the upside and remove. 4. Plug the AC adaptor/charger power cord into AC electrical outlet. 2. Connect one end of the DC cord (provided) to the "DC IN 9.6V" of the camera/recorder.
,When using the AC adaptor/charger to Powerthe camera!recorder;the battery level [ indicator may display !%_,,.This indicator is usedfor battery operation and has no meaning [ when us ng the AC adaptorlcharger to power the cameral[ecorder.
_omk_ i. Connect the small plug of the car battery cord to the "DC IN 9.6V" jack of the camera/recorder. 2. Connect the other end of the car battery cord to the car's cigarette lighter socket. , The car battery cord is designed to be used only with automobiles having a 12-vo!t negative ground systeml ' To prevent fire or shock hazard or damage to your camerairecorder, please Use only the specified car battery cord.
When the "_" indication appears in the viewfinder and flashes while the camera/recorder is being operated with a battery (provided), it indicates that the battery charge is low. Charge it or replace it with a charged battery. NOTE:When the camera/recorde r is turned on, the battery leVel indicator in the viewfinder indicating the condition fully Chargedl ,! :' ' is displayed: of camera/recording is displayed battery.
1. Plug the AC adaptor/charger power cord into AC electrical outlet. 2. Attach the battery to the AC adaptor/charger. Align the mark "_" on the battery with that of AC adaptor/charger and push the battery flush with the AC adaptor/charger and slide it in the direction of arrow. NOTE: You must remove the DC cord from the AC adapt0richarger the DC cord is connected, ,,CHARGE" t O charge the battery If 1 light will not light. 3.
NOTES: 1. The time required for charging the battery is approx, three hours. 2. When fully charged, the battery should supply approx. 90 ~ 120 minutes of operating time (depending on how much you use zoom and pause). 2. Charge the battery after use and store it at normal room temperature. 3. Recharge the battery at least once every six months. The battery is a lead-acid battery. This battery tends to discharge if not used for an extended period of time.
1. Connect the POWER SOURCE. (See pages 9 and 10.) 2. Press "STOP/EJECT" button and insert the cassette so the transparent window is toward you and the arrow toward the cassette holder. Slide the cassette into cassette holder as far as it will go. NOTE: Push in t he center of the cassette a!! the way unti ! it is latched by the cassette holder: 3. Press the cassette J holder. The holder will latch in the operating position. 4.
! 5. Now, press "REC/PAUSE" button to start shooting the picture. The "REC" indication appears in the viewfinder and you are now recording the picture you see through the viewfinder. 6. Press "REC/PAUSE" button to stop recording. Press the button again to resume recording. The ",." indication will appear in the viewfinder instead of "REC" while the camera/recorder is in the record/pause (stand-by) mode. NOTES: ' The"TAPE END', indication starts flashing minutes recording time left on the cassette.
8. Press "REW" button. The tape will be rewound to the beginning 9. Press "PLAY" button. The picture you just recorded will be seen through the viewfinder. NOTE: If you connec!,the camera/recorder to your TV; you can see the picture played back on your TV, Refer to VIEWING THE PICTURE PLAYED BACK ON YOUR TV on page 34. 10. After playing, press "STOP/EJECT" button 11. Slide the "POWER" switch to "OFF" position to turn off the camera/recorder. "STOP/EJECT" button to remove the cassette. 12.
NOTE:If you have a cassette tape that has already been partiallY recorded on and you want to record the remaining blank sectionl see QUICK EDIT on page 26_ 1 J 25
Diagram of camera Diopter Control Use this control to focus the viewfinder. Camera Light When the "POWER" switch is in the "CAM" position, the camera light is turned on and off automatically or manually in the record and record/pause modes depending on the position of "LIGHT" switch. Turn the camera light off after use. [NOTE: The camera light turns on only in the record and record/paUse Microphone Sensitive to sounds coming from the direction m0des. in which the camera is pointed.
iBEBTiFiBA?iBN AND8PERATiOB OFBSBTR6[B according to the brightness of the object. When the switch is set to "ON", light turns on. Set the switch to "OFF" to turn the light off manually. Electronic Viewfinder (EVF) Displays what the camera/recorder lens sees. The electronic viewfinder as a convenient color monitor during playback of recorded material. the camera also functions "AV OUT/IN" Switch This switches the "AUDIO" and "VIDEO" jacks between the input and the output.
i IDENTIFICATION AND OPERATION OF CONTROLS :: cALrrioN Diagram of Buttons "TITLE" Button Press this button to create and record personalized camera/recorder's built-in titler. (See "TITLE "DATE RECORDING" titles on your videos with the on page 28.) / TIME" Button Press this button to display the date and time in the viewfinder.
iBEBYiFiBAYiBN ANB8PERAYiOB OFBSBYR6[B • This 32. button is used to record new video in place of existing video and audio. See page "REW" Button Press this button during stop or fast forward mode, and fast-rewinding starts. "4 4 ,, appears in the viewfinder. Press the button during playback of tape, and the tape is played back in the rewind direction approximately 3 times faster than the normal speed to confirm the recorded contents.
iBEBTiFiBA?iBN AND8PERA?ibB OFBSBTR6[B Diagram of Camera "BATTERY" Releases Release Lever the battery attached to the video camera/recorder. Cassette Holder Press "STOP/EJECT" button to open the cassette direction when inserting. holder. Be aware of the cassette "DC IN 9.6V" Jack When using the AC adaptor/charger (provided) or the car battery cord (optional), connect this jack and the "DC OUTPUT" of the AC adapter/charger or the car's cigarette lighter socket.
DATE/TIME Setting pg. 20 The date and time can be recorded on your tape to act as a handy reference when viewing them at a later time. Use the following procedure to set up this display for the current date and time. The time backup battery is rechargeable. Charge the backup battery every two months. Set "POWER" switch to "OFF" position and connect a charged battery or AC adaptor/charger to the camera/recorder for 24 hours. Make sure that the current time is displayed correctly before you start recording.
DATE/TIME Setting pg. 20 you go past the date you want to set, press "REW" appears, press "STOP/EJECT" button. 5. Press "F.FWD" button. or "REW" button. When the correct date button to select year, and then press "STOP/EJECT" 6. Press "F.FWD" or "REW" button as many times as may be required correct hour, and then press "STOP/EJECT" button. 7. Repeat step 6 to select minute and AM/PM. to select the 8. After setting AM or PM, press "DATE/TIME" button to change the display and start the internal clock.
This feature records the date automatically once a day. After you begin recording, the date is recorded automatically for 10 seconds. The same date is recorded again in the following cases. • When the cassette is replaced. • When "® Au3-o,, is displayed again after being switched to the date display. • When the recording is for less than 10 seconds.
Program AE automatically selects the shutter speed 1/60, 1/100, 1/120, 1/180, 1/250, 1/350, 1/500, 1/750, 1/1000, 1/1500, 1/2000 or 1/4000 second that is optimum for the brightness of the subject. The iris is also adjusted automatically in response to the shutter speed.
• You can always focus the object automatically. The range of the object with which auto focus can be used. • On "T" side: about 3.6 feet (1.1 m) from the lens surface to infinity. • On "W" side: about 1.2 inches (3cm) from the lens surface to infinity. 1. Objects not in the center of the viewfinder. at far and near positions lit by a spotlight at the same time. or neon signs, etc. behind glass with water droplets .................... 5. Objects with almost no difference or dust on it.
Objects moving rapidly. 7. Dark objects.
1. Press the FOCUS control (AUTO/MAN) buttons simultaneously. "FOCUS" appears in the viewfinder. You can adjust the focus manually. 2. Use the power zoom T control to zoom up completely to your subject. If you don't use the T control to zoom to the picture you want, the picture may fall out of focus when actual recording starts. 3. Pressing the FOCUS control (AUTO/MAN) 4 (far) or _ (near) button until the subject is in focus. 4. Use the power zoom W control to zoom back to the picture you desire.
• Press power zoom switch on the "W" side, and the picture gradually widens. • Press the power zoom switch on the "T" side, and the picture gradually becomes telescopic. • The zooming speed is slow when the power zoom switch is pressed lightly, and the zooming speed is fast when the switch is pressed strongly. • When power zoom switch is operated, the zoom position is displayed in the viewfinder in 10 steps for several seconds.
The digital zoom increases the magnification of the power zoom by 2 times. You must place the subject you wish to magnify at the center of the viewfinder. Press and hold the power zoom T control until you find the picture you want. You control the zoom with the power zoom T and W controls. When "ZOOM" is not displayed in the viewfinder, normal zoom functions resume.
The instant zoom feature activates the digital zoom to magnify the subject 1.5 regardless of zooming engaged by the power zoom T and W controls. Press the INST. ZOOM button. "I.ZOOM" appears in the viewfinder and the picture is magnified 1.5 times.
Allows you to shoot objects as close as 1.2 inches (3 cm) from the lens tip. Press and hold "W" side of power zoom switch. An object is auto focused. NOTES: , Determine the size of the object by moving the camera backward and forward.
Use the fade feature to add a professional touch to your recordings. Use the FADE button to select one of the three fade options. White fade: Fades in from a white screen or fades out to a white screen. "_" appears in the upper left corner of the viewfinder. Wipe fade: The picture opens gradually from the center of a black screen or closes into the center to a black screen, "tQ" _- appears in the upper left corner of the viewfinder.
FN_3g _ _ 43
Indexing your tapes while recording makes it easy to find desired program segments when you play back the tape in a VCR that has a compatible indexing feature called the "VHS Index Search System". See your VCR's instruction manual for index playback instructions. "INDEX" signals are recorded when the following operations are performed. • When power is turned on about 4 hours after it is switched off and then recording is started.
The quick edit feature allows you to search for the end of previously recorded material, or find a particular spot on your tape, to begin your editing, or recording new material. Quick edit is used while the camera/recorder is in the record/pause (stand-by) mode. By holding down the "F.FWD", "REW", or "PLAY" button, you can visually search or play your tape. Releasing the buttons ("F.FWD", "REW", or "PLAY") immediately stops the tape at that position.
1. In record/pause (stand-by) mode, press "REVIEW" button, and the last few seconds of the recorded scene is played back in the reverse direction and then played back in the forward direction. 2. When the tape reaches the end of the scene you have just recorded, the camera/recorder returns to the record/pause (stand-by) mode. Recording starts again when the "REC/PAUSE" button is pressed again.
Each time the "DISPLAY" button is pressed, the display in the viewfinder switches as follows. @ ...... When the linear time tape counter with memory display appears on the screen of the connected is displayed in the viewfinder, TV/monitor receiver.
Shows length of tape run in hours, minutes and seconds. Load a cassette into the camera/recorder and perform recording or playback; the counter indicates the elapsed time. NOTES: , The linear time counter does not operate when nothing is recorded ' c0unter changes tO 0:00:00 When cassette is ejectedl l + on the tape.
The tape remaining display shows the remaining tape that can be used for recording and playback, using seven dashes. This feature is handy when recording since it lets you know how long you can record on the loaded tape. Insert a cassette in the camera/recorder and start recording or playback; 10 seconds later, the remaining tape will be displayed. When the cassette is ejected, the display will disappear. ,,r_q......... is displayed for 10 seconds after the tape starts to run.
You can easily create and record personalized titles on your videos with the camera/recorder's built-in titler. The titler will store 2 different title pages in memory. Once a title is stored, it can be displayed and recorded at any time. Each title page can contain two lines of 16 characters each. The titler contains 47 different characters for creating titles. [ NOTE: A Cassette cannot be loaded or ejected when creating a title, 1 1.
5. After you have selected the first character, press "SHIFT" cursor to the place you want the next character. 6. Repeat steps 4 and 5 until you have completed [NOTE: Character may flash l however button to move the flashing the title. it will be recorded correctly without flashing. 1 7. After completing your title, press "PAGE" button and create the title on another page. 8. After creating the title, press "TITLE" button to remove the title graphics from the viewfinder.
_Hpp_ ¸_ [_ 1. Slide "POWER" switch to "VIDEO". 2. Locate the position on the tape that you wish to record the title. 3. Set "POWER" switch to "CAM". 4. Press "TITLE" button to display the title graphics. 5. Press "PAGE" button until the title you wish to record appears in the viewfinder. 6. Press "REC/PAUSE" button to start the title recording. 7. Press "TITLE" button to remove the title graphics from the viewfinder. The camera/recorder will now record as normal.
If your TV or VCR has video/audio camera/recorder. _ ,L out jacks, you can record the TV program with . a_ ! ),tJDFO I)IJ
i RECORDINGTV PROGRAMS :: 54
The audio dubbing feature lets you record new audio (sound) on a previously recorded tape without erasing the original video. When you audio dub a tape, the previous audio is erased and replaced with new sound. ' Sound from the built.in microphone and the AUDIO jack can be dubbed. , When dubbing audio from the bui!t-in mici0phonel Set AV OUT/IN' switch to !'OUT' and do not connect the ',AUDIO,, jacki When dubbing audio from the !!AUDIO,, jackl set the "AM OUT/IN "switch to !!IN,: 1.
i AUDIO DUBBING _,_ i _U_ = _,,_ 56
The audio and video dubbing feature lets you record new audio (sound) and video (pictures) simultaneously on a previously recorded tape. When you audio and video dub a tape, the previous audio and video are erased and replaced with the new sound and pictures. The replacement audio and video can be the sound and picture taken by the camera or from a video source connected to "AUDIO" and "VIDEO" jacks on the camera/recorder.
7. Press "REW" button to rewind the tape to the approximate position from which you want to start dubbing. 8. Press "PLAY" button, and when the exact position to start dubbing is reached, press "REC/PAUSE" button. 9. Press "DUBBING AUDIONIDEO" and "PLAY" buttons simultaneously twice. "AV DUB u" is displayed in the viewfinder, and at the same time the picture to be dubbed appears. 10. Press the "REC/PAUSE" reads "0:00:00". button.
When the tape reaches beginning and stops.
To play back a tape recorded on your camera/recorder and view it on your TV receiver, you must connect the camera/recorder to the TV receiver using either audio/video cord (not provided) or RF converter unit (optional). You also may play back the tape recorded by your camera/recorder on any other VHS video cassette recorder. The camera/recorder records and plays back in VHS standard speed (SP). A tape recorded in long play (LP) or extra long play (EP) cannot be played back on this camcorder.
NOTE: when noise appears VCR so there is no noise Example Diagram back picture adjust ,,TRACKING,, control on the I 3: If your TV is a regular TV, of Hookup 1. Disconnect INOTE: in the played the VHF antenna Leave the UHF antenna 2. Connect the VHF antenna leads from the rear of the TV receiver. leads cOnnected to the TV: 1 lead to "IN FROM ANT" on the RF converter unit. If the cable is round (75 Ohm), it will connect directly to the "IN FROM ANT".
When "REC/PAUSE" button is pressed during playback, a still picture can be seen. To start again 3ress "REC/PAUSE" button and playback will be resumed.
When you press "F.FWD" or "REW" button during playback, the tape will be played back at a speed about 3 times faster than normal playback speed, and you can easily locate a certain spot on the tape. Press "PLAY" button to return to normal playback mode or press "STOP/EJECT" button to stop tape movement. NOTE:There will be some noise (interference)!nthe forward or [everse sea[ch pictures while visually scanning.
When the tape counter with memory indication appears in the viewfinder, a tape that is being rewound automatically stops when the counter reads approximately "0:00:00". This is useful if there is a section of tape you want to review immediately after recording or if you want to return to the same point several times in a row. 1. Press "DISPLAY" button. (The indicator "M" appears beside the linear time counter.) 2. Start playing or recording a tape. 3.
If you wish to exchange or copy some of your friend's favorite home recordings, the following instructions can be used to connect camera/recorder to VCR for this purpose. 1. Connect the video/audio camera/recorder. cord (provided) to "AUDIO" and "VIDEO" of your 2. Connect the other ends to "AUDIO IN", "VIDEO IN" of your VCR as shown in the diagram above. 3. Set "AV OUT/IN" switch to "OUT" position. 4. Play the tape on the camera/recorder and record it on the VCR.
A rotating erase head which eliminates joints between recorded segments.
Use the built-in camera light it you wish to shoot objects in dark places. When the "LIGHT" switch is set to "AUTO", the camera light turns on automatically when the camera/recorder is pointed at objects in a dark place and turns off when it is pointed objects in a bright place. _dee at dpOwer consumption of the built-in camera light is about a half that of the r: Therefore, if the camera light is turned on when a fullY charged battery , the operating time of the battery falls to about a half. 1 1.
:: USING THE BUILT-IN CAMERA LIGHT • During operation and/or after use of the camera light, the front surface and lamp of the camera light will be very hot. To avoid burns or hair damage, do not touch them with your hand. ° When the camera light is on. do not allow water to drop on the light. • When the camera light is on. avoid subjecting the camera light to impacts or sharp vibrations. • Do not allow the cooling vents to become blocked. Also.
To use the electronic viewfinder without eyeglasses on, adjust the diopter control for optimum focus adjustment, 69
You can adjust the viewfinder "BRIGHT" Control brightness, color and tint as required. Viewfinder brightness can be adjusted by turning the "BRIGHT" control. This does not affect the picture actually recorded by the camera/recorder. "COLOR" and "TINT" Controls The small "COLOR" and "TINT" controls are set at the factory and should require no adjustment. If they ever require adjustment, use a plastic screwdriver. Make the adjustments with caution to prevent damaging the miniature controls.
Attach the shoulder strap (provided), as illustrated.
Your camera/recorder is a highly sophisticated instrument. It has been carefully checked and adjusted at the factory under the most rigid quality control and inspection systems. However, should problems develop, check the following points and take the necessary corrective measures. INSERTING OR REMOVING THE CASSETTE Symptom Check Point & Correction Cassette holder cannot be opened when you press "STOP/EJECT" button.
RECORDING TV PROGRAMS OFF THE AIR Check Point & Correction Symptom The camera/recorder can not go into the recording The cassette has had the erase mode, even when "REC/PAUSE" button is pressed, prevention tab removed. Stick a piece of cellophane tape over the erase prevention hole or select a different cassette. Set "POWER" switch to "CAM" position. Connect the camera/recorder and TV (or VCR). Set "AV OUT/IN" switch to "IN" position.
PLAYBACK OF PRE-RECORDED CASSETTE Check Point & Correction Symptom "PLAY" Set the "POWER" button cannot be engaged. "VIDEO" switch to position. No picture appears on television screen when Set the television to the "PLAY" pressed, camera/recorder channel (3 or 4) depending upon the selected channel on RF channel select switch.. (TV is connected Interference to the camera/recorder on playback picture. by using RFof converter is unit.) Adjust the tracking using control (power zoom switch).
[ TROUBLESHOOTING 1. Rotate and remove eye cup. 2. Clean the picture tube face and lens. To prevent scratching, use a soft non abrasive cloth, swab or lens cleaning paper. 3. Align the reference mark and rotate the eye cup in the direction of arrow.
• Picture playback may become blurred or be interrupted. This does not mean that the recorded program has been erased. • Dirt accumulated on the head after long periods of use causes this problem. In this case, head cleaning requiring highly technical care is necessary. • Consult your nearest dealer or VCR service center before using a head cleaning tape.
The video camera/recorder is a precision electromechanical device which will require periodic maintenance after a period of normal use. We expect that no maintenance other than head cleaning will be required during the warranty period of most users, unless the video camera/recorder is heavily used or seldom used. Normal maintenance is the responsibility of the user, although defective parts are covered during the warranty period.
General Power requirements Power consumption Dimensions: 9.6V DC 8 watts (nominal) 4-3/8"(W) x 8-1/16" (H) x 12-1/4" 111(W) x 205(H) x 311(D) mm 4.4 Ibs (2.0 kg) Weight Video Recorder Format Section VHS Record/playback system Video signal Tape speed Video input Video output Audio input Audio output Fast forward/rewind time Camera (D) Two video record/playback EIA standard NTSC color 33.35 mm/sec. heads plus a flying erase head 1.0 Vp-p, 75 ohm 1.0 Vp-p, 75 ohm -7.
For U.S.A. only HITACHI Service Hotline To locate an authorized HITACHI service facility in the continental U.S.A. DIAL TOLL FREE 7 days a week, 24 hours a day 800 HITACHI 1-800-448-2244 Hitachi Home Electronics (America), Inc. Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico.
You're ready to add more excitement to your home videos, and Hitachi's right there with you. With our new line of video accessories, you can go anywhere your imagination takes you. Now that you know how much fun video recording can be, you'll want to add new dimensions to your home videos. With convertor lenses, adaptors, extra. We are preparing two kinds of accessory. 1. Included accessory See page 3, 2. Optional accessory Chart of Accessories * Consult your nearest service center to replace the lamp.
[ACCESSORY TO ADD MORE EXCITEMENT i Order Form _Introduced Warranty: in the 94-95 line. Mention as current model! 90 days labor, 1 year parts. VM3700A: 12xl optical zoom, 24xl digital zoom, 1 lux, 46 mm lens diameter, 270k pixels, color viewfinder. Shutter Speeds: 60, 100, 120, 180, 250, 350, 750, 1000, 1500, 2000, 4000 of a second. Uses TTL (Through The Lens) focusing system.
