Manual

1. Connect the POWER SOURCE. (See pages 9 and 10.)
2. Press "STOP/EJECT" button and insert the cassette so the transparent window is
toward you and the arrow toward the cassette holder. Slide the cassette into cassette
holder as far as it will go.
NOTE: Push in thecenter ofthe cassette a!!the way unti! it is latched by the cassette
holder: 1
3. Press the cassette holder. The holder will latch in the operating position.
4. Press and hold the small button on "POWER" switch, and then slide it to the "CAM"
position. The "POWER" indicator will light and the camera/recorder will enter
record/pause mode automatically.
' If the erase prevention tab on the cassette is removedlthe ,TAPE indication in the
vie_inder flasher for severa! seconds and the camera/recorder will not enter record/pause
model
2!