Cordless Radio Model UR 18DSL Handling instructions Note: Before using this cordless radio, carefully read through these HANDLING INSTRUCTIONS to ensure efficient, safe operation. It is recommended that these INSTRUCTIONS be kept readily available as an important reference when using this cordless radio. 00̲UR18DSL̲Eng.
5 2 1 3 0 9 6 4 8 7 ! # $ % @ & ^ * ( ) ࿆ ࿓ ࿇ ࿈ ࿉ ࿊ ࿋ ࿌ ࿒ ࿑ ࿎ ࿐ ࿏ 2 00̲UR18DSL̲Eng.
CORDLESS RADIO SAFETY WARNINGS WARNING Read all safety warnings and all instructions. Failure to follow the warnings and instructions may result in electric shock, fire and/or serious injury. Save all warnings and instructions for future reference. 1. Use only the specified power supply voltage. • Use of any other voltage may lead to fire or electric shock. 2. Avoid damaging the AC adapter cord.
NAMES OF PARTS 1 FM antenna # Sleep timer / Clock button 2 Handle $ Band selector button 3 Rear door % FM mode / Alarm button 4 Speaker ^ Memory button (1 - 5) 5 Buckle & Search button (Clock (-) button) 6 Exterior input (AUX IN) terminal * Search button (Clock (+) button) 7 Headphone jack ( Volume dial 8 AC adapter jack ) Select dial 9 Charging jack (5 V 0.
SERVICE TIME PER BATTERY CHARGE Battery capacity Service time* 1.3 Ah Approx. 7 hours 1.4 Ah Approx. 8 hours 1.5 Ah Approx. 8 hours 2.0 Ah Approx. 11 hours 2.4 Ah Approx. 13 hours 2.6 Ah Approx. 14 hours 3.0 Ah Approx. 17 hours 3.3 Ah Approx. 18 hours ● Attaching the AC Adapter The provided AC adapter can be used to power the radio from an electric socket. Pull back the rubber cover and connect the AC adapter to the AC adapter terminal.
Loading a plug-in battery (Fig. 4) Insert the battery into the space in the radio body as far as it will go before securing with the belt. If the belt is not the right length, adjust the length of the belt. ● Auto Select Belt Plug-in battery NOTE ○ The display changes in the order of [FM→AM→AUX→FM] each time the band select button is pressed. 3. Select a station using Auto, Manual or Save (Memory). 4. If noise occurs or reception is poor, refer to “For Better Reception”. 5.
Positioning Reception may be poor when the radio is used inside a vehicle or building. When inside a building, place the radio near the window to ensure better reception. Noise may occur if the radio is placed near an appliance that generates noise. Move the radio away from the source of the noise. The radio turns off automatically after 8 hours. Buzzer Alarm To turn off the buzzer alarm, press the FM mode / alarm button. If it is not turned off, the buzzer will continue to sound for 1 minute and then stop.
● To turn the voice messages on/off By factory default setting, the voice message function plays “Welcome to Hitachi Power Tools” when the power is turned on and “Presented by Hitachi Power Tools” when the power is turned off. To mute the voice messages, press memory button 1 while the power is turned off and display [OFF] on the display panel. To restore the voice messages, press memory button 1 while the power is turned off and display [ON] on the display panel.
00̲UR18DSL̲Eng.indb 9 2009/06/26 18:46:16 CONTROL PCBA FIBRE WASHER SCREW D2.5×10 MODE BUTTON FUNCTION PCBA TPE COVER (B) 19 20 21 22 SCREW M1.7×5 16 18 BUTTON COVER 15 17 FUNCTION BUTTON POWER BUTTON 13 14 WASHER D4 SCREW D4×15 11 12 SCREW D3×10 8 RUBBER WASHER FUNCTION LABEL FRONT HOUSING ASS’Y 7 9 DIAL 6 10 TPE COVER (A) SPEAKER COVER 5 SCREW D4×15 3 4 ROD ANTENA GUARD BAR 1 PART NAME 2 ITEM NO.
00̲UR18DSL̲Eng.
00̲UR18DSL̲Eng.
Shinagawa Intercity Tower A, 15-1, Konan 2-chome, Minato-ku, Tokyo, Japan 907 Code No. C99181811 A Printed in China 00̲UR18DSL̲Eng.
