PROJECTION COLOR TV 61SWX10B 61SWX12B 53SWX10B 53SWX12B 53UWX10B 61UWX10B 43UWX10B OPERATING GUIDE IMPORTANT SAFETY INSTRUCTIONS FIRST TIME USE SETUP SEL CUSTOMIZE VIDEO AUDIO THEATER 2-4 5-22 THE GENIUS REMOTE CONTROL 23-35 ULTRATEC BIT-MAP ON-SCREEN DISPLAY 36-70 USEFUL INFORMATION INDEX 71-75 As an ENERGY STAR¨ Partner, Hitachi, Ltd. has determined that this product meets the ENERGY STAR¨ guidelines for energy efficiency.
IMPORTANT Follow all warnings and instructions marked on this projection television. RISK OF ELECTRIC SHOCK DO NOT OPEN The lightning flash with arrowhead symbol, within an equilateral triangle, is intended to alert the user to the presence of uninsulated Òdangerous voltageÓ within the productÕs enclosure that may be of a sufficient magnitude to constitute a risk of electric shock to persons. CAUTION: TO REDUCE THE RISK OF ELECTRIC SHOCK, DO NOT REMOVE COVER (OR BACK). NO USER SERVICEABLE PARTS INSIDE.
SAFETY TIPS IMPORTANT SAFETY INSTRUCTIONS CAUTION: SAFETY POINTS YOU SHOULD KNOW ABOUT YOUR HITACHI PROJECTION TELEVISION ¥ Read these instructions. ¥ Keep these instructions. ¥ Heed all warnings. ¥ Follow all instructions. Our reputation has been built on the quality, performance, and ease of service of HITACHI televisions. Safety is also foremost in our minds in the design of these units. To help you operate these products properly, this section illustrates safety tips which will be of benefit to you.
SAFETY TIPS PROTECTION AND LOCATION OF YOUR TELEVISION 16-1. If an outside antenna is connected to the television, be sure the antenna system is grounded so as to provide some protection against voltage surges and built-up static charges. Section 810 of the National Electrical Code, NFPA No.
ACCESSORIES Check to make sure you have the following accessories before disposing of the packing material. POWER POWER VCR TV CBL STB VCR TV AV3 1 2 3 4 5 6 7 8 9 0 SLEEP C.C. HELP ASPECT CD DVD LAST CH ANT TAPE 2 3 4 5 6 7 8 9 0 SLEEP PIX C.C.
HOW TO SET UP YOUR NEW HITACHI PROJECTION TV ANTENNA Unless your TV is connected to a cable TV system or to a centralized antenna system, a good outdoor color TV antenna is recommended for best performance. However, if you are located in an exceptionally good signal area that is free from interference and multiple image ghosts, an indoor antenna may be sufficient. LOCATION Select an area where sunlight or bright indoor illumination will not fall directly on the picture screen.
HOOK-UP CABLES AND CONNECTORS Most video/audio connections between components can be made with shielded video and audio cables that have phono connectors. For best performance, video cables should use 75-Ohm coaxial shielded wire. Cables can be purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors. Before purchasing any cables, be sure of the output and input connector types required by the various components and the length of each cable.
FRONT PANEL CONTROLS FRONT VIEW Models: 61UWX10B, 53UWX10B, 43UWX10B h g b INPUT EXIT e Models: 61SWX10B, 61SWX12B, 53SWX10B, 53SWX12B h g f e f POWER POWER PUSH PUSH c d a MENU VOL- SELECT F VOL+ CH- E H CURSOR b CH+ H c d a INPUT MENU VOL- EXIT SELECT F VOL+ CH- E H CURSOR CH+ H INPUT 3 INPUT 3 L/MONO R S-VIDEO VIDEO AUDIO j L/MONO R S-VIDEO VIDEO AUDIO MAGIC FOCUS j i MAGIC FOCUS i a MENU/SELECT button This button allows you to enter the MENU, making it p
FRONT PANEL CONTROLS f POWER light You will see a red light when the TV is turned on. g PERFECT PICTURE sensor The Perfect Picture sensor will make automatic picture adjustments depending on the amount of light in the room to give the best picture. (see page 57) h REMOTE CONTROL sensor Point your remote at this area when selecting channels, adjusting volume, etc. i MAGIC FOCUS Use this button to adjust your picture quality to optimum performance.
FRONT PANEL JACKS AND CONNECTIONS The front panel jacks are provided as a convenience to allow you to easily connect a camcorder or VCR as shown in the following examples: NOTE: 1. Completely insert connection cord plugs when connecting to front panel jacks. If you do not, the played back picture may be abnormal. 2. If you have a S-VHS VCR, use the S-INPUT cable in place of the standard video cable. 3. If you have a mono VCR, insert the audio cable into the left audio jack of your TV.
REAR PANEL JACKS Models: Models: 61UWX10B, 53UWX10B, 43UWX10B a f e 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B h i OPTICAL INPUT ANT A a COAXIAL INPUT ef STOP ANT A CONNECT ONLY 8 OHM SPEAKERS DO NOT SHORT CIRCUIT THESE TERMINALS (Such damage is NOT COVERED by your television warranty) TO CONVERTER REAR SPEAKER S-VIDEO S-VIDEO TO CONVERTER S-VIDEO S-VIDEO S-VIDEO VIDEO VIDEO S-VIDEO L ANT B Y/VIDEO VIDEO VIDEO ANT B VIDEO Y/VIDEO Y/VIDEO VIDEO Y/VIDEO R (MONO) (MONO) L L R
REAR PANEL JACKS f Component: Y-PBPR Inputs Inputs 4 and 5 provide Y-PBPR jacks for connecting equipment with this capability, such as a DVD player or Set Top Box. You may use standard video signal for INPUT:4 and 5. Items g ~ j are for 53/61SWX10B and 53/61SWX12B only. g REAR SPEAKER Output Terminals These terminals are used to connect external speakers, which are used for the surround sound feature. The volume level is controlled by the televisionÕs main volume.
REAR PANEL CONNECTIONS TYPICAL FULL-FEATURE SETUP (43/53/61UWX10B MODELS) Outside antenna or cable TV coaxial cable 2-Way signal splitter DVD Player VCR #1 ANT IN OUTPUT S-VIDEO V L OUTPUT PB/CB PR/CR L Y R R Optional, see tips on page 15 VCR #2 S-VIDEO ANT A Optional, see tips on page 15 TO CONVERTER ANT B S-VIDEO S-VIDEO VIDEO VIDEO Y/VIDEO (MONO) (MONO) S-VIDEO L L PB (MONO) L PR L R INPUT R AUDIO TO HI-FI AUDIO R L L R AUDIO R AUDIO R AUDIO L INPUT 1 Stereo System
FIRST TIME USE TYPICAL FULL-FEATURE SETUP (53/61SWX10B AND 53/61SWX12B MODELS) Outside antenna or cable TV coaxial cable 2-Way signal splitter DVD Player VCR #1 ANT IN OUTPUT S-VIDEO V L Y R OUTPUT PB/CB PR/CR L R Optional, see tips on page 15 VCR #2 S-VIDEO Surround Speakers L R OPTICAL INPUT See connections on page 15 - - + COAXIAL INPUT STOP ANT A CONNECT ONLY 8 OHM SPEAKERS DO NOT SHORT CIRCUIT THESE TERMINALS (Such damage is NOT COVERED by your television warranty) REAR SPEAKER O
REAR SPEAKER TERMINAL CONNECTIONS CONNECT AFTER TURNING THE POWER TO THE TV OFF. (Rear speaker connection applies to SWX model only) Press the Right Speaker red button and insert the positive (+) lead wire into the hole next to the button. Once the wire is in place, pull the red button back to original position and the wire is locked into place. In the same manner, press the Right Speaker black button and insert the negative (-) lead wire. Repeat this procedure for the Left Speaker.
CONNECTING EXTERNAL AUDIO SOURCES CONNECTING EXTERNAL AUDIO AMPLIFIER To control the audio level of an external audio amplifier with the remote control, connect the system as shown below.
FIRST TIME USE Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Match the numbers below to the diagrams for speaker placement and refer to the table on page 18 for the different surround sound requirements. (See pages 65-67 for SURROUND functions.) a The televisionÕs internal speakers. b The televisionÕs internal center channel speaker, which is on only when the television is in SURROUND-STADIUM, SURROUNDROCK ARENA, SURROUND-JAZZ CLUB, SURROUND-PRO LOGIC, or SURROUND-DOLBY DIGITAL mode.
FIRST TIME USE Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B SURROUND FEATURE REQUIRED CONNECTION OPTIONAL CONNECTION EFFECT OFF 1 35 Receive mono and stereo sound. STADIUM 124 35 Listener has feeling of being at a stadium. ROCK ARENA 124 35 Listener has feeling of being at a rock concert. JAZZ CLUB 124 35 Listener has feeling of being at a jazz club. DOLBY PRO LOGIC 124 35 Movie theater reproduction, with separate left, center, right, and surround channels.
CONNECTING EXTERNAL VIDEO SOURCES The exact arrangement you use to connect the VCR, camcorder, laserdisc player, DVD player, or HDTV Set Top Box to your TV set is dependent on the model and features of each component. Check the owner’s manual of each component for the location of video and audio inputs and outputs. The following connection diagrams are offered as suggestions. However, you may need to modify them to accommodate your particular assortment of components and features.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A STEREO SOURCE TO INPUT1~INPUT5 1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack. 4. Press the VID1~VID5 button to view the program from the VCR or laserdisc player.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING AN S-VIDEO SOURCE TO INPUT 1, 2 AND 3 1. Connect the cable from the S-VIDEO OUT of the VCR or the laserdisc player to the INPUT (S-VIDEO) jack, as shown on the TV set below. 2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO/R) jack. 3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack. 4.
CONNECTING EXTERNAL VIDEO SOURCES CONNECTING A COMPONENT SOURCE TO VIDEO 4 OR 5: Y-PBPR. 1. Connect the cable from the Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (Y) jack, as shown on the TV set below. 2. Connect the cable from the CB/PB OUT or B-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PB) jack. 3. Connect the cable from the CR/PR OUT or R-Y OUT of the Laserdisc/DVD player or HDTV set top box to the INPUT (PR) jack. 4.
THE GENIUS REMOTE CONTROL In addition to controlling all the functions on your HITACHI Projection TV, the new remote control is designed to operate different types of VCRs, CATV (Cable TV) converters, set-top-box, satellite receiver, DVD players, and other audio/video equipment with one touch. Basic operation keys are grouped together in one area. To operate your TV, point the remote control at the remote sensor of the TV and press the TV button.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV a c b POWER CBL STB SOURCE WIZARD f h i m k l p s VCR TV AV1 DVD AV2 AV3 1 2 3 4 5 6 7 8 9 ANT LAST CH HELP C.C ASPECT IT SELECT VOL PIX EX NU ME MUT VCR VID US STAT E CS PLUS + 1 VID VID 3 PIP SC TV INFO PIP CH g h i m k l p s o n q r D5 VI POWER VCR TV CBL STB CD DVD TAPE AMP 1 2 3 4 5 6 7 8 9 0 SLEEP ANT LAST CH HELP C.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV g AV1, AV2, AV3, or CD, TAPE, AMP buttons When pressed, each of these buttons will blink to indicate the remote is in Audio/Video mode. (see page 34) NOTE: Your remote control ÒSOURCE WIZARDÓ buttons are either labeled as ÒAV1, AV2 and AV3,Ó or ÒCD, TAPE, and AMP.Ó If your remote control ÒSOURCE WIZARDÓ buttons are labeled as ÒAV1, AV2, and AV3,Ó please program your Audio/Video components as follow for best performance. Use ÒAV1Ó to program your CD brand.
HOW TO USE THE GENIUS REMOTE TO CONTROL YOUR TV r THUMB STICK/SELECT button All the On-Screen Display features can be set or adjusted by using the THUMB STICK. The THUMB STICK will highlight functions or adjust and set different features. Press the THUMB STICK toward desired direction and press down to SELECT. s VOLUME, MUTE button Press the VOLUME up (G) or down (H) button until you obtain the desired sound level.
PICTURE-IN-PICTURE (PIP) Your HITACHI Projection TV incorporates Dual Tuner technology designed for improved viewing enjoyment. This Dual Tuner feature allows you to view antenna inputs on both the main picture and sub-picture simultaneously, with separate tuning control for each. The Dual Tuner can operate with only one input (ANT A only) or two inputs (ANT A and ANT B). ANT A input can be viewed as both the main picture and the sub-picture simultaneously. ANT B can only be viewed as a main picture.
PICTURE-IN-PICTURE (PIP) PICTURE-IN-PICTURE CONT. SPLIT MODE PIP Split Mode PIP displays the main picture and sub-picture evenly on the screen. Ant A 10 Ant A 12 Sub Picture Main Picture SURF MODE PIP This feature will automatically scan all active channel numbers (those set in memory) and display them as PIP sub-pictures, along the right edge of the screen. Press the PIP button a second time to remove the sub-pictures from the screen. Ant A 28 09 PIP PIP 10 12 NOTES: 1. 2. 3. 4. 5.
PICTURE-IN-PICTURE (PIP) d FREEZE button (With PIP ON) If you wish to freeze the sub-picture, press the FREEZE button. This is convenient when trying to write down the address for a mail order company, recording statistics for a sporting event, etc. To return the picture to motion, press the FREEZE button again. NOTE: When PIP is on, the FREEZE function will only operate when SINGLE/SPLIT PIP mode is chosen.
USING THE REMOTE TO CONTROL VCR FUNCTIONS Operating the precoded function for your VCR. This remote is designed to operate different types of VCRs. You must first program the remote to match the remote system of your VCR. (refer to page 35 for pre-codes) 1. Turn ON your VCR. 2. Aim the remote control at the front of your VCR. 3. Press and release the VCR button to switch to VCR pre-coded mode. 4.
USING THE REMOTE TO CONTROL CABLE BOX FUNCTIONS Operating the precoded function for your cable box. This remote is designed to operate different types of cable boxes. You must first program the remote to match the remote system of your cable box. (refer to page 35) 1. Turn ON your cable box. 2. Aim the remote control at the front of your cable box. 3. Press and release the Cable (CBL) button to switch to Cable pre-coded mode. 4.
USING THE REMOTE TO CONTROL SET-TOP-BOX/SATELLITE RECEIVER FUNCTIONS Operating the precoded function for your set-top-box/satellite receiver. This remote is designed to operate different types of set-top-box/satellite systems. You must first program the remote to match the remote system of your set-top-box/satellite systems. (refer to page 35) 1. Turn ON your set-top-box/satellite systems. 2. Aim the remote control at the front of your set-top-box/satellite systems. 3.
USING THE REMOTE TO CONTROL DVD FUNCTIONS Operating the precoded function for your DVD player. This remote is designed to operate different types of DVD players. You must first program the remote to match the remote system of your DVD player. (refer to page 35 for pre-codes) 1. Turn ON your DVD player. 2. Aim the remote control at the front of your DVD player. 3. Press and release the DVD button to switch to DVD pre-coded mode. 4.
USING THE REMOTE TO CONTROL ADDITIONAL AUDIO/VIDEO EQUIPMENT Operating the precoded function for your Audio/Video component. This remote is designed to operate different types of Audio/Video component. You must first program the remote to match the remote system of your Audio/Video component. (refer to page 35 for pre-codes) 1. Turn ON your Audio/Video component you wish to control with the Remote. 2. Aim the remote control at the front of your Audio/Video component. 3.
VCR, CABLE, SATELLITE, DVD and AUDIO/VIDEO CODES VCR BRAND. . . . . . . . . . . . . . . . . CODE Adventura . . . . . . . . . . . . . . . . . . . . . . 01 Aiko. . . . . . . . . . . . . . . . . . . . . . . . . . . 09 Aiwa . . . . . . . . . . . . . . . . . . . . . . . . . . 01 Akai . . . . . . . . . . . . . . . . . . . . . 02, 47, 48 American High. . . . . . . . . . . . . . . . . . . 23 Asha . . . . . . . . . . . . . . . . . . . . . . . . . . 44 Audiovox . . . . . . . . . . . . . . . . . . . . . . .
SETUP CUSTOMIZE VIDEO AUDIO THEATER SEL ULTRATEC OSD 1. Press MENU on the remote control to display the different features on your HITACHI Projection TV. 2. Press the THUMB STICK to highlight a different feature. 3. Press EXIT on the remote control to quickly exit from a menu. HELP 4. Press HELP on the remote control when a menu is displayed, and text will appear giving a description of that menu. NU ME EX IT SELECT This part of the screen shows what selections are available.
SETUP CUSTOMIZE VIDEO AUDIO THEATER SEL ULTRATEC OSD SETUP CUSTOMIZE VIDEO AUDIO Set Menu Language Plug & Play Set Antenna/Cable Set Channel Memory Edit Channel Memory View Channel List Set The Clock Magic Focus Picture Formats Choose English, French, or Spanish text. Optimum hook up for your system. Select Antenna or Cable TV. First time set up for channel buttons. Channel buttons, add or skip. Check channel name, scan, and child lock. Set before using timer features.
SETUP SET UP SETUP Select SETUP when setting your TV up for the first time. Use the THUMB STICK G or H on the remote to highlight the function desired. SETUP CUSTOMIZE VIDEO AUDIO THEATER SEL Se t M e n u Language Plu g & Pl ay Se t An te nna/C abl e Se t Ch a nnel Memory Ed it Ch a nnel Memory Vie w Ch annel Li st Se t T h e Cl ock M a g ic F ocus Pictu r e Formats NU ME To Q u i t Exit Use THUMB STICK G or H to select the sub-menu of your choice.
SETUP SET UP This graphic guide function will help you to properly set up your TV or Home Theater System. Simply answer three questions and a graphic will be displayed, showing you the optimum setup for your personalized system.
SETUP SET UP SET ANTENNA/CABLE SETUP Select ANTENNA if you are using an indoor or outdoor antenna. Select CATV if you have cable TV.
SETUP SET UP SET CHANNEL MEMORY This feature will automatically store active TV channels in SET CHANNEL MEMORY. This will allow you to skip unused channels when using CHANNEL UP (G) or DOWN (H).
SETUP SET UP EDIT CHANNEL MEMORY SETUP CUSTOMIZE Use this function after SET CHANNEL MEMORY is completed to add or erase additional channels to the remote control CHANNEL G or H buttons.
SETUP SET UP VIEW CHANNEL LIST This function allows you to review which channels are labeled in NAME THE CHANNEL, which have been added to EDIT CHANNEL MEMORY (SCAN), and which are protected by SET PARENTAL LOCKS.
SETUP SET UP SET THE CLOCK The time must be set before you can SET PROGRAM TIMER or TV TIME OUT.
SETUP SET UP MAGIC FOCUS Your HITACHI Projection TV has three color projection tubes: one for red, one for green, one for blue. When mixed together in the proper proportion, the output of these three color tubes can produce any color. To produce these colors, however, the beams must be precisely aligned over each other so that the colors can be mixed. The process of aligning these picture beams is called ÒconvergenceÓ.
SETUP SET UP PICTURE FORMATS The PICTURE FORMATS function is very useful when setting up reception High Definition, Standard Definition and NTSC signals. SETUP CUSTOMIZE VIDEO AUDIO THEATER SEL THUMB STICK Se t M e nu Language Plu g & Pl ay Se t An tenna/C abl e Se t Ch annel Memory Ed it Channel Memory Vie w Channel Li st Se t T h e C l ock M a g ic Focus Pic t u re Formats Menu SETUP SEL To Q u i t V.
SETUP SET UP ASPECT STYLE Fill This function allows you to select when receiving either NTSC or SDTV. Full screen picture is available in this mode when receiving letterbox signal. Both vertical edges will be hidden if you select Fill for ordinary 4:3 picture. Smooth Wide This function allows you to select when receiving either NTSC or SDTV signal. 4:3 picture is expanded horizontally as being close to both left and right sides.
CUSTOMIZE CUSTOMIZE This selection contains advanced features which will make TV viewing easier and more enjoyable. CUSTOMIZE NAME THE CHANNEL Use this feature to give up to 20 channels a name when ANTENNA signal source is selected and up to 60 channels a name when CATV signal source is selected. SETUP CUSTOMIZE VIDEO THEATER AUDIO CUSTOMIZE SEL THUMB STICK NU ME SEL THUMB STICK Na me t h e Ch a n n e l Na m e th e In p u ts Se t F a vo r ite Ch .
CUSTOMIZE CUSTOMIZE NAME THE INPUTS SETUP Use this feature to give a name to any of the five video inputs. CUSTOMIZE VIDEO AUDIO THEATER CUSTOMIZE SEL SEL THUMB STICK N a m e t h e Ch a n n e l N a m e t h e I np u t s S e t F a v o r i t e Ch .
CUSTOMIZE CUSTOMIZE This function allows you to group your favorite channels into six personalized categories that you can rename. A total of 36 channels can be stored in the FAVORITE CHANNELS function. SET FAVORITE CHANNELS SETUP VIDEO CUSTOMIZE THEATER AUDIO SETUP SEL VIDEO CUSTOMIZE AUDIO THEATER SEL THUMB STICK N a m e t h e Ch a n n e l N a m e t h e In p u ts S e t F a v orit e Ch .
CUSTOMIZE CUSTOMIZE FAVORITE CHANNELS (OPERATION) Use this function to display FAVORITE CHANNEL selections as sub-pictures or to tune the main picture to a desired favorite channel. 3 Se t F a v o rit e Ch . C H 12 CH 3 THUMB STICK M OVIES 3 6 8 MOVIES 3 6 8 NU ME 11 12 13 11 12 13 Menu 6 To S u r f To Q u i t Menu Exit To S u r f 8 To Q u i t Exit THUMB STICK 11 CH 11 M OVIES 3 6 8 12 11 12 13 Menu To S u r f 13 To Q u i t Exit Select a category using THUMB STICK F or E.
CUSTOMIZE CUSTOMIZE SET PARENTAL LOCKS This function will block out the picture and sound of the selected channel or video input. It can also be used to keep the TV from being viewed for a scheduled amount of time that you set. The code to enter SET PARENTAL LOCKS is a four digit secret code number. The factory preset code is 0000. Use the number buttons to select secret code. SETUP CUSTOMIZE VIDEO AUDIO CUSTOMIZE THEATER SEL SEL Nam e t he Channel Nam e t he I nput s S et Favori t e Ch.
CUSTOMIZE CUSTOMIZE This function will automatically turn the TV on and off, one time only, every day, or once a week. SET PROGRAM TIMER SETUP CUSTOMIZE VIDEO AUDIO THEATER SEL THUMB STICK Nam e th e Ch a n n e l Nam e th e In p u t s Set F a vo ri te Ch .
CUSTOMIZE CUSTOMIZE VIDEO INPUT SENSOR SETUP Use this function to automatically turn the TV on and tune to VIDEO: 4 when it detects a VIDEO input. CUSTOMIZE VIDEO AUDIO CUSTOMIZE THEATER SEL SEL N a m e T h e Ch a n n e l N a m e T h e In p u ts S e t F avo r ite Ch .
CUSTOMIZE CUSTOMIZE Closed Captions are the dialogue, narration, and/or sound effects of a television program or home video which are displayed on the TV screen. Your local TV program guide denotes these programs as or . CLOSED CAPTION SETUP CUSTOMIZE VIDEO AUDIO THEATER CUSTOMIZE SEL SEL THUMB STICK N a m e th e Ch a n n e l N a m e th e In p u ts S e t F a v o r ite Ch .
VIDEO VIDEO Select VIDEO to adjust picture settings and improve picture quality. VIDEO SETUP CUSTOMIZE VIDEO AUDIO THEATER SEL THUMB STICK NU ME Co n tr a st Br ig h tn e ss Co lo r T in t Sh a r p n e ss Re se t Ad va n ce d Se ttin g s Menu To Menu Bar 100% 50% 50% THUMB STICK 50% C ontrast To Quit Exit Menu To Menu Bar 100% To Quit Exit Use the THUMB STICK G or H to highlight the function to be adjusted. Press the THUMB STICK F or E to adjust the function. Press EXIT to quit menu.
VIDEO VIDEO Your HITACHI Projection TV has a PERFECT PICTURE function which will automatically adjust picture settings to produce the highest quality picture possible. When PERFECT PICTURE is highlighted, press down on THUMB STICK to turn the PERFECT PICTURE on or off.
AUDIO AUDIO Models: 61UWX10B, 53UWX10B, 43UWX10B Select AUDIO to adjust the TV to your preference and to improve the sound quality.
AUDIO AUDIO Models: 61UWX10B, 53UWX10B, 43UWX10B ADVANCED SETTINGS Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
AUDIO AUDIO Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Select AUDIO to adjust the TV to your preference and to improve the sound quality.
AUDIO AUDIO Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B ADVANCED SETTINGS Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
THEATER THEATER Models: 61UWX10B, 53UWX10B, 43UWX10B THEATER Use this function to choose picture and audio settings for a true home THEATER experience. THEATER MODES Use this function to choose from automatic picture settings to optimize your TVÕs performance.
THEATER THEATER Models: 61UWX10B, 53UWX10B, 43UWX10B The following surround settings will reproduce the ÒliveÓ sound you would hear in concert halls, sports stadiums, movie theaters, etc. with only two speakers.
THEATER THEATER Models: THEATER 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Use this function to choose picture and audio settings for a true home THEATER experience. THEATER MODES Use this function to choose from automatic picture settings to optimize your TVÕs performance.
THEATER THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B SURROUND The following surround settings will reproduce the ÒliveÓ sound you would hear in concert halls, sports stadiums, movie theaters, etc. when you set up your speaker system as shown in the section on audio system setup on pages 17-18. The surround system is most effective with movie and other stereo material that is Dolby Surround encoded.
THEATER THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B DOLBY PRO LOGIC Dolby Pro Logic provides four separate sound channels: front left, center, front right, and surround. For properly encoded programs marked the center sound channel contains the dialogue for the program viewed. The left and right channels produce sound effects that will match the action on the TV screen.
THEATER THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B DOLBY DIGITAL Dolby Digital provides six independent sound channels: front left, center, front right, surround left, surround right, and sub woofer. Select this feature when viewing properly encoded programs marked . To fully benefit from Dolby Digital Surround, it is recommended that the surround speaker system be complete, as shown on page 17.
THEATER THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B Set audio input to Digital or Analog. This fueature is used only when viewing VIDEO:4 or VIDEO:5 inputs, since only these inputs can accept DIGITAL audio input.
THEATER THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B LISTENING MODE SETUP CUSTOMIZE Choose between pre-set audio modes Standard, Night, or Maximum. Take advantage of these features to reduce or increase sound effects.
THEATER THEATER Models: 61SWX10B, 61SWX12B 53SWX10B, 53SWX12B SPEAKER SETUP Select specific speaker output, including a subwoofer.
CARE OF YOUR HITACHI PROJECTION TV AND YOUR REMOTE CONTROL DO Dust the screen and cabinet with a soft cloth. Clean the screen with a soft cloth moistened in warm water and dry with a soft cloth. A mild soap may be used if the screen is extremely dirty. Place your television away from extreme heat, humidity, and extremely dusty places. Remove the plug from the wall outlet if your television will not be used for a long period of time, for instances, when you go on vacation.
RECEPTION PROBLEMS ¥ IGNITION NOISE: Black spots or horizontal streaks may appear, picture may flutter or drift. Usually caused by interference from automobile ignition systems, neon lamps, electrical drills, and other electrical appliances. ¥ GHOSTS: Ghosts are caused by the television signal following two paths. One is the direct path and the other is reflected from tall buildings, hills or some other objects. Changing the direction or position of the antenna may improve reception.
ure rd cor is p TV rec lug t is s Try ge wit d an che in oth d''O er N" cha Ch nn eck el ( an sta ten tion na Ch tro eck con ub ne an le) ctio ten ns na Ch (ba for eck ck bro ou of T ken tsid V) Ch lea ea eck d-i nte nw nn for a ire loc al i Ad nte jus tC rfe ren on t r ce ast Ad jus con tB tro rig l htn Ad ess jus con tC tro olo l rc Ad on jus tro tT l int con Ad tro jus l tV olu me con tro l SYMPTOMS CH TR ECK Y T TH HE ES Be SE E I sur AD TEM ee xte JU Be rna ST S AN sur l co ME D ep nn ect ow NT ion e
USEFUL INFO Features: ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ ¥ Superfine Picture Quality 1200 Line Horizontal Resolution PERFECT PICTURE System Remote (Controls many VCR brands, cable boxes, satellite boxes, and other audio equipment.
USEFUL INFO e c i v r e s To locate an authorized HITACHI service facility in the continental U.S.A. and Canada, DIAL TOLL FREE 7 days a week, 24 hours a day 800 HITACHI (1-800-448-2244) Hitachi America, LTD. Home Electronics Division Hitachi has made every effort to assure you hours of trouble free operation from your unit. However, should you require service, a network of Hitachi Authorized Service Facilities has been established in all 50 states and Puerto Rico.
QR48041
