Model Modèle Modelo UC 18YG Battery Charger Chargeur de batterie Cargador de baterías SAFETY INSTRUCTIONS AND INSTRUCTION MANUAL WARNING IMPROPER OR UNSAFE use of this battery charger can result in death or serious bodily injury! This manual contains important information about product safety. Please read and understand this manual BEFORE operating the power tool. Please keep this manual available for other users and owners before they use the battery charger. This manual should be stored in safe place.
English CONTENTS Page IMPORTANT SAFETY INFORMATION ............. 3 MEANINGS OF SIGNAL WORDS ..................... 3 SAFETY IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER .......................... 4 IMPORTANT SAFETY INSTRUCTIONS FOR USE OF THE BATTERY AND BATTERY CHARGER ................................... 5 DISPOSAL OF THE EXHAUSTED BATTERY ..................................................... 6 Français TABLE DES MATIERES Page INFORMATIONS IMPORTANTES DE SÉCURITÉ ..................................
English IMPORTANT SAFETY INFORMATION Read and understand all of the safety precautions, warnings and operating instructions in the Instruction Manual before operating or maintaining this battery charger. Most accidents that result from battery charger operation and maintenance are caused by the failure to observe basic safety rules or precautions. An accident can often be avoided by recognizing a potentially hazardous situation before it occurs, and by observing appropriate safety procedures.
English SAFETY IMPORTANT SAFETY INSTRUCTIONS FOR BATTERY CHARGER WARNING: Death or serious bodily injury could result from improper or unsafe use of battery chargers. To avoid these risks, follow these basic safety instructions: READ ALL INSTRUCTIONS 1. 2. 3. 4. 5. 6. 7. 8. This manual contains important safety and operating instructions for battery charger Model UC18YG.
English * If the input rating of a battery charger is given in watts rather than in amperes, the corresponding ampere rating is to be determined by dividing the wattage rating by the voltage rating–for example: 1,250 watts = 10 amperes 125 volts 9. Do not operate battery charger with damaged cord or plug-replace them immediately. 10. Do not operate battery charger if it has received a sharp blow, been dropped, or otherwise damaged in any way; take it to a qualified serviceman. 11.
English 12. ALWAYS operate charger on standard household electrical power (120 volts). Using the charger on any other voltage may overheat and damage the charger. 13. ALWAYS wait at least 15 minutes between charges to avoid overheating the charger. 14. ALWAYS disconnect the power cord from its receptacle when the charger is not in use. DISPOSAL OF THE EXHAUSTED BATTERY WARNING: Do not dispose of the exhausted battery. The battery must explode if it is incinerated.
English OPERATION AND MAINTENANCE NOTE: The information contained in this Instruction Manual is designed to assist you in the safe operation and maintenance of the battery charger. NEVER operate, or attempt any maintenance on the battery charger unless you have first read and understood all safety instructions contained in this manual. Some illustrations in this Instruction Manual may show details or attachments that differ from those on your own battery charger.
English SPECIFICATIONS Input power source Single phase: AC120V 60Hz Charging time Approx. 30 minutes .......... EB712S, EB7S, FEB7S, EB714S, EB912S, EB9S, FEB9S, EB914, EB914S, EB1212S, EB12S, FEB12S, EB1214L, EB1214S, EB1412S, EB1414, EB1414S, EB1812S, EB1814SL Approx. 50 minutes .......... EB7B, EB9B, EB12B, EB1220BL, EB14B, EB1820, EB1820L Approx. 60 minutes .......... EB924, EB1224, EB1424, EB1824L Charger Charging voltage .............................. DC 7.2–18V Charging current ................
English 2. Insert the battery to the battery charger. Insert the battery into the battery charger as shown in Fig. 2. EB712S EB7S FEB7S EB714S EB7B EB912S EB9S FEB9S EB914 EB914S EB9B EB924 EB12S FEB12S EB1212S EB12B EB1214L EB1224 EB1214S EB1220BL EB1412S EB1414 EB1414S EB14B EB1424 EB1812S EB1814SL EB1820 EB1820L EB1824L Fig. 2 3. Charging 䡬 When the battery is connected to the battery charger, charging will commence and the pilot lamp will light on.
English 䡬 Regarding the temperature of the rechargeable battery. The temperatures for rechargeable batteries are as shown in the table below, and batteries that have become hot should be cooled for a while before being recharged.
English Regarding electric discharge in case of new batteries, etc. As the internal chemical substance of new batteries and batteries that have not been used for an extended period is not activated, the electric discharge might be low when using them the first and second time. This is a temporary phenomenon, and normal time required for recharging will be restored by recharging the batteries 2 – 3 times. How to make the batteries perform longer.
English 3. Service parts list CAUTION: Repair, modification and inspection of Hitachi Power Tools must be carried out by an Hitachi Authorized Service Center. This Parts List will be helpful if presented with the tool to the Hitachi Authorized Service Center when requesting repair or other maintenance. In the operation and maintenance of power tools, the safety regulations and standards prescribed in each country must be observed.
Français INFORMATIONS IMPORTANTES DE SÉCURITÉ Lire et comprendre toutes les précautions de sécurité, les avertissements et les instructions de fonctionnement dans ce mode d’emploi avant d’utiliser ou d’entretenir ce chargeur de batterie. La plupart des accidents causés lors de l’utilisation ou de l’entretien du chargeur de batterie proviennent d’un non respect des règles ou précautions de base de sécurité.
Français SECURITE CONSIGNES DE SÉCURITÉ IMPORTANTES POUR LE CHARGEUR DE BATTERIE AVERTISSEMENT: Une utilisation incorrecte ou dangereuse des chargeurs de batterie peut entraîner la mort ou des blessures graves. LIRE TOUT CE MODE D'EMPLOI. 1. 2. 3. 4. 5. 6. 7. 8. 14 Ce manuel renferme des consignes de sécurité et d’utilisation importantes pour le chargeur de batterie modèle UC18YG.
Français TABLEAU 1 CALIBRE MINIMUM RECOMMANDÉ POUR LES CORDONS DE RALLONGE DES CHARGEURS DE BATTERIE Intensité nominale d’entrée CA (ampères)* Egal ou supérieur à mais non inférieur à 0 2 3 2 3 4 * Calibre du cordon Longueur de cordon en pieds (mètres) 25 (7.
Français 3. 4. NE JAMAIS NE JAMAIS 5. NE JAMAIS 6. NE JAMAIS 7. 8. NE JAMAIS NE JAMAIS 9. NE JAMAIS 10. NE JAMAIS 11. NE JAMAIS 12. TOUJOURS 13. TOUJOURS 14. TOUJOURS court-circuiter la batterie. insérer d’objets dans les ouïes d’aération du chargeur. Il pourrait en résulter un choc électrique ou des dommages du chargeur. effectuer la recharge à l’extérieur. Eloigner la batterie des rayons directs du soleil et utiliser exclusivement dans des endroits à faible humidité et bien aérés.
Français UTILISATION ET ENTRETIEN REMARQUE: Les informations contenues dans ce mode d’emploi sont conçues pour assister l’utilisateur dans une utilisation sans danger et un entretien du chargeur de batterie. NE JAMAIS utiliser ni entreprendre une révision du chargeur de batterie sans avoir d’abord lu et compris toutes les instructions de sécurité contenues dans ce manuel. Certaines illustrations dans ce mode d’emploi peuvent montrer des détails ou des accessoires différents de ceux du chargeur de batterie.
Français SPECIFICATIONS Input power source Single phase: AC120V 60Hz Durée de recharge Environ. 30 minutes ......... EB712S, EB7S, FEB7S, EB714S, EB912S, EB9S, FEB9S, EB914, EB914S, EB1212S, EB12S, FEB12S, EB1214L, EB1214S, EB1412S, EB1414, EB1414S, EB1812S, EB1814SL Environ. 50 minutes ......... EB7B, EB9B, EB12B, EB1220BL, EB14B, EB1820, EB1820L Environ. 60 minutes ......... EB924, EB1224, EB1424, EB1824L Chargeur Tension de charge ............................ CC 7.2–18 V Courant de charge .........
Français 2. Insérer la batterie dans le chargeur de batterie. Insérer la batterie dans le chargeur de batterie comme indiqué à la Fig. 2. EB712S EB7S FEB7S EB714S EB7B EB912S EB9S FEB9S EB914 EB914S EB9B EB924 EB12S FEB12S EB1212S EB12B EB1214L EB1224 EB1214S EB1220BL EB1412S EB1414 EB1414S EB14B EB1424 EB1812S EB1814SL EB1820 EB1820L EB1824L Fig. 2 3. Recharge 䡬 Quand la batterie est raccordée au chargeur de batterie, la recharge commence et la lampe témoin s’allume.
Français Tableau 2 Batteries rechargeables EB712S, EB7S, FEB7S, EB714S, EB7B, EB912S, EB9S, FEB9S, EB914, EB914S, EB9B, EB924, EB1212S, EB12S, FEB12S, EB1214L, EB1214S, EB12B, EB1220BL, EB1224, EB1412S, EB1414, EB1414S, EB14B, EB1424, EB1812S, EB1814SL, EB1820, EB1820L, EB1824L 䡬 Température à laquelle la batterie peut être rechargée 32°F — 104°F (0°C — 40°C) Durée de recharge Le Tableau 3 montre le temps de recharge nécessaire en fonction du type de batterie.
Français En ce qui concerne le courant de décharge d’une batterie neuve Etant donnée que les substances chimiques internes sont restées inactives dans le cas des batteries neuves ou des batteries qui sont restées longtemps inutilisées, le courant de décharge risque d’être très faible lors des première et deuxième utilisations. Ce phénomène est temporaire et le temps de recharge normal sera rétabli quand les batteries auront été rechargées 2 ou 3 fois.
Français ATTENTION: Il serait extrêmement dangereux d’utiliser ce chargeur de batterie avec des vis mal serrées. 2. Vérifier s’il y a de la poussière. Enlever la poussière avec un chiffon doux ou un chiffon humecté d’eau savonneuse. Ne pas utiliser de décolorant, chlorure, essence ou diluant, car ces produits pourraient endommager le plastique. 3.
Español INFORMACIÓN IMPORTANTE SOBRE SEGURIDAD Antes de utilizar o de realizar cualquier trabajo de mantenimiento de este cargador de baterías, lea y comprenda todas las precauciones de seguridad, advertencias e instrucciones de funcionamiento de este Manual de instrucciones. La mayoría de los accidentes producidos en la operación y el mantenimiento de un cargador de baterías se deben a la falta de observación de las normas o precauciones de seguridad.
Español SEGURIDAD INSTRUCCIONES IMPORTANTES DE SEGURIDAD PARA EL CARGADOR DE BATERÍAS ADVERTENCIA: La utilización inadecuada del cargador de baterías puede resultar en lesiones serias o en la muerte. Para evitar estos riesgos, siga las instrucciones de seguridad ofrecidas a continuación. LEA TODAS LAS INSTRUCCIONES 1. 2. 3. 4. 5. 6. 7. 8. 24 Este manual contiene instrucciones importantes de seguridad para el cargador de baterías modelo UC18YG.
Español Tabla 1 CALIBRE (AWG) MÍNIMO RECOMENDADO PARA CABLES PROLONGADORES PARA EL CARGADOR DE BATERÍAS Amperaje nominal de entrada de CA* Igual o superior a pero inferior a 0 2 3 2 3 4 Calibre (AWG) del cable Longitud del cable, Pies (metros) 25 (7.
Español 3. 4. NUNCA NUNCA cortocircuite la batería. inserte ningún objeto en las ranuras de ventilación del cargador. Si lo hiciese podría recibir descargas eléctricas o dañar el cargador de baterías. 5. NUNCA cargue en exteriores. Mantenga la batería alejada de la luz solar directa, y utilícela solamente donde haya poca humedad y una buena ventilación. 6. NUNCA cargue cuando la temperatura sea inferior a 50°F (10°C) o superior a 104°F (40°C). 7. NUNCA conecte dos cargadores de baterías juntos. 8.
Español OPERACIÓN Y MANTENIMIENTO NOTA: La información contenida en este Manual de instrucciones ha sido diseñada para ayudarle a utilizar con seguridad y mantener este cargador de baterías. NUNCA haga funcionar ni efectúe el mantenimiento del cargador de baterías antes de leer y comprender todas las instrucciones de seguridad contenidas en este manual. Algunas ilustraciones de este Manual de Instrucciones pueden mostrar detalles o accesorios diferentes a los del propio cargador de baterías.
Español ESPECIFICACIONES Fuente de alimentación de entrada Monofásica: 120 V CA, 60 Hz Tiempo de carga Aprox. 30 minutos ........ EB712S, EB7S, FEB7S, EB714S, EB912S, EB9S, FEB9S, EB914, EB914S, EB1212S, EB12S, FEB12S, EB1214L, EB1214S, EB1412S, EB1414, EB1414S, EB1812S, EB1814SL Aprox. 50 minutos ........ EB7B, EB9B, EB12B, EB1220BL, EB14B, EB1820, EB1820L Aprox. 60 minutos ........ EB924, EB1224, EB1424, EB1824L Cargador Tensión de carga .......................... 7.2 – 18 V CC Corriente de carga ...
Español 2. Inserte la batería en el cargador de baterías. Inserte la batería en el cargador de baterías como se muestra en la Fig. 2. EB712S EB7S FEB7S EB714S EB7B EB912S EB9S FEB9S EB914 EB914S EB9B EB924 EB12S FEB12S EB1212S EB12B EB1214L EB1224 EB1214S EB1220BL EB1412S EB1414 EB1414S EB14B EB1424 EB1812S EB1814SL EB1820 EB1820L EB1824L Fig. 2 3. Carga 䡬 Cuando inserte la batería en el cargador de baterías, se iniciará la carga, y la lámpara piloto se encenderá.
Español Tabla 2 Temperatura a la que podrá recargarse la batería Batería EB712S, EB7S, FEB7S, EB714S, EB7B, EB912S, EB9S, FEB9S, EB914, EB914S, EB9B, EB924, EB1212S, EB12S, FEB12S, EB1214L, EB1214S, EB12B, EB1220BL, EB1224, EB1412S, EB1414, EB1414S, EB14B, EB1424, EB1812S, EB1814SL, EB1820, EB1820L, EB1824L 䡬 32°F — 104°F (0°C — 40°C) Tiempo de carga En la Tabla 3 se muestra el tiempo de recarga requerido de acuerdo con el tipo de batería. Tabla 3 Tensión de la batería (V) Tiempo de recarga (min.
Español Descarga eléctrica en caso de baterías nuevas, etc. Como la substancia química interna de las baterías nuevas o las que no se hayan utilizado durante mucho tiempo no está activada, la descarga eléctrica puede ser inferior cuando se utilicen por primera y segunda vez. Este fenómeno es temporal, y el tiempo normal requerido para la recarga se restablecerá recargando las baterías 2 – 3 veces. Forma de hacer que las baterías duren más 䡬 Recarque las baterías antes de que se hayan agotado completamente.
Español PRECAUCIÓN: La utilización del cargador de baterías con tornillos flojos es extremadamente peligrosa. 2. Comprobación del polvo El polvo podrá eliminarse con un paño suave y seco o ligeramente humedecido en agua jabonosa. No utilice lejía, cloro, gasolina, ni diluidor de pintura, porque podrían dañar el plástico. 3. Lista de repuestos PRECAUCIÓN: La reparación, modificación e inspección de las herramientas eléctricas Hitachi deben ser realizadas por un Centro de Servicio Autorizado de Hitachi.
FUSE (3.15A/125V) PRINTED CIRCUIT BOARD ASS'Y TAPPING SCREW (W/FLANGE) D3 × 20 NAME PLATE 3 4 5 6 CASE (A)•(B) SET CORD 1 PART NAME 2 ITEM NO.
Please contact HITACHI KOKI U.S.A. LTD. at 1-800-59-TOOLS (toll free), or HITACHI AUTHORIZED POWER TOOL SERVICE CENTER recarding COLLECTION. Pour le RAMASSAGE, contacter HITACHI KOKI U.S.A. LTD. au 1-800-59-TOOLS (appel gratuit), ou UN SERVICE APRES-VENTE D’OUTILS ELECTRIQUE AGREE PAR HITACHI. Con respecto a la RECOLECCIÓN de baterías, póngase en contacto con HITACHI KOKI U.S.A. LTD. número 1-800-59-TOOLS (llamada gratis), o con HITACHI AUTORIZED POWER TOOL SERVICE CENTER. Issued by Hitachi Koki Co.