Instruction Manual

2 Press “ " or " " to select "Venti. Mode" and press "OK".
3 Press “ " or " " to select the operation mode and press “OK”
to conrm. The item changes as follows: “AUTO Ventilation”
↔ “THEX Ventilation” ↔ “Normal Ventilation”.
Press”
” to return to Step2.
5.18.1 Night Purge
This function is not yet available in current units sold in the
Europe market.
When there is a temperature difference between indoor and
outdoor, this function can reduce the cooling load on next
morning by automatically exhausting the hot air inside the room
at night.
1 Select “Total Heat Exchanger SET” on the “Function Menu”
screen and press “OK”.
2 Press “ " or " " to select "Night Purge" and press "OK".
3 Press “ " or " " to select "ON" and press “OK”.
Press ”
” to return to Step2.
EN
FUNCTION MENU
PMML0565 rev.1 - 04/202237