Instruction Manual

2 Press “ ” or “ ”, the level changes as follows:
“Not Set” ↔ “LOW” ↔ “MED” ↔ “HIGH”.
Select the level and press “OK”.
Press “ ”, the screen returns to the “Function Menu” screen.
5.5 POWER SAVING/NIGHT QUIET SCHEDULE SETTING
This function starts and stops power savings control and
operation noise reduction control at the desired time.
Power saving/night quiet schedule settings can be set up to ve
times a day on each day of the week.
The power savings schedule controls the schedule set in the
power savings mode setting.


 Schedule day and time setting
“5.5.1 Schedule Day and Time
Setting”
To set the desired time and level.
To set up ve times a day on each day.
 Schedule turn ON / OFF setting
“5.5.2 Schedule Turn ON/
OFF Setting”
Schedule operation is not performed while the schedule
is disabled. This is a function that temporarily prevents
the schedule from running. It is used when there is a long
vacation.
? NOTE
• When managing multiple patterns of schedules on the same day as in
following examples, don’t set overlapped times zone.
• If the schedule times zones overlap as in example 2, the schedule will
be cancelled at the rst off time (14:00 in the case of the example 2).
Example of power saving operation and schedule
setting
Example of power saving and night quiet schedule
operation
Example 1
Example 2
FUNCTION MENU
PMML0565 rev.1 - 04/202216