Instruction Manual

5.3.3 Power Savings Level Setting
1 Select “Power Savings Setting” on the “Function Menu”
screen and press “OK”.
2 Press “ ” or “ ” to select the “Level”and press “OK”.
3 Press “ ” or “ ”, the power savings level changes as follows:
“LOW” ↔ “MED” ↔ “HIGH”.
Select the level and press “OK”.
Press “ ”, the screen returns to the “Power Savings Setting”
screen.
You may not be able to select from the settings in the power
saving details setting.
5.4 NIGHT QUIET OPERATION
This function restricts the operation noise of the outdoor unit.
? NOTE
• This cannot be set if the sub remote controller or outdoor unit does not
support power savings.
• It is possible to change the operation noise reduction function setting
of the outdoor unit by making the following operation noise reduction
settings.
Remote Controller Setting Outdoor Unit Setting Name
Not Set No Setting
Low Setting 1
Med Setting 2
High Setting 3
- For the amount of reduction, please contact related local
distributor.
• When using the operation noise reduction setting, the cooling /
heating capacity can be decreased.
1 Select “Night Quiet Operation” on the “Function Menu”
screen and press “OK”.
EN
FUNCTION MENU
PMML0565 rev.1 - 04/202215