Instruction Manual
Table Of Contents
- 1 Safety summary
- 2 Switch Names and Functions
- 3 Operation
- 4 Icon Description
- 5 Function Menu
- 5.1 Simple Timer Setting
- 5.2 Operation Schedule Setting
- 5.3 Power Savings Setting
- 5.4 Night Quiet Operation
- 5.5 Power Saving/Night Quiet Schedule Setting
- 5.6 Power Consumption Display
- 5.7 Autoboost (QUICK MODE) Setting
- 5.8 Comfort Setting
- 5.9 Motion sensor setting
- 5.10 Setback Setting
- 5.11 Elevating Grille
- 5.12 Filter Reminder Reset Setting
- 5.13 FrostWash
- 5.14 Individual Louver Setting
- 5.15 Cancel Individual Louver Setting
- 5.16 Louver Open/Close
- 5.17 Ventilation
- 5.18 Total Heat Exchanger Setting
- 6 Service & installation menu
- 6.1 Installation menu
- 6.1.1 Test Run
- 6.1.2 Function selection
- 6.1.3 Thermistor Selection
- 6.1.4 Input / Output Setting
- 6.1.5 Thermistor Calibration in Controller
- 6.1.6 Fan Speed at Cooling Thermo-OFF
- 6.1.7 Fan Speed at Heating Thermo-OFF
- 6.1.8 Indoor Unit Address Change
- 6.1.9 Address Check Operation
- 6.1.10 Address Initialization
- 6.1.11 Setting Initialization
- 6.1.12 Main Remote Setting
- 6.1.13 Priority Setting
- 6.1.14 Cancel Preheating Control
- 6.1.15 Elevating grille Setting
- 6.1.16 Power Up Setting
- 6.1.17 Setback Trigger Unit
- 6.1.18 Refrigerant Leak Sensor Setting
- 6.2 Service menu
- 6.3 Check Menu
- 6.1 Installation menu
- 7 Screen Display Setting menu
- 8 Contact Information menu
- 9 Hotel Mode Setting
- 10 In Alarm Condition
9.2 OFF TIMER
? NOTE
• “Off timer” can be set even when the air conditioner is stopped.
• If the set time is reached during stop, the off timer setting is cancelled.
• While the wired remote controller is prohibited, “off timer” cannot stop
the air conditioner operation.
1 Press “
” or “ ” to select “Off Timer” in the home screen.
2 Press “ ” or “ ” to select the timer setting and press “OK”.
• Press and hold “
” or “ ” to increase or decrease
continuously.
• The timer can be set from 0.5 to 23 hours.
• Press “
” to increase 30 minutes of each step for 0.5 to
9.5 hours, 1 hour of each step for 10 to 23 hours.
9.3 RESET CONTROLLER SETTING
1 Press “
”
or “
”
to select “Reset Controller Setting” in the
“Menu” screen and press “OK”.
2 Press “ ” or “ ” to select "Reset" and press
“
OK”, return to
"Menu" screen. The default settings are as the following table:
Off Timer Not Set
Language English
Unit °F
HOTEL MODE SETTING
PMML0565 rev.1 - 04/2022100