User Manual

5. Detailed Menu Operation
31
5.6 IR Receiver Setting
The product (wired remote controller) has a built-in "IR Receiver" which can receive commands from the
wireless remote controller(sold separately, models: HCRB10NEWQ/PC-LH7QE/PC-LH7QE1).
By pointing the transmitter of the wireless remote controller to this product, you can set temperature,
operation mode, etc. from the wireless remote controller.
This function is only available when the IR receiver function is set at ON. For how to set "IR Receiver" ON/OFF,
please refer to Page 32. And the default setting of "IR Receiver" is ON.
•
Sending Commands from Wireless Remote Controller
Aer the transmitter of the wireless remote controller is directed to the wired remote controller, press the
buttons to send commands.
(1) When the commands are sent, the indication "
" on the LCD of wireless remote controller ashes once.
(2) When the "IR Receiver" receives the commands, the buzzer sounds.
Wireless Remote Controller (sold separately)
Wired Remote Controller