User Manual

5. Detailed Menu Operation
27
5.2 Capacity Control Details Setting
This function is used to set "Capacity Control Level".
NOTES:
•
This function cannot be set when the indoor unit and outdoor unit do not support this function.
•
For how to set "Capacity Control" mode ON/OFF, please refer to "4. Menu Operation".
1. Capacity Control Details Setting (Capacity Control Level Setting)
Step1. Enter "Capacity Control Details Setting" by selecting
"0 2" as the item number, refer to "5. Detailed Menu
Operation".
Step2. Press " " or " " to switch the set value
（
"0 0"
↔
"0 1"
↔
"0 2"
）
to set the "Capacity Control Level".
Details of set value are shown in the below table:
Set Value Description
0 0 Capacity Control Level is Low.
0 1 Capacity Control Level is Med.
0 2 Capacity Control Level is High.
Step3. Press "
" to save the setting and the item number "0 2"
starts to ash.
Step4. Press " " (On/O) once, or press " " for 3 seconds to
return to the home screen.
Step5. When "Capacity Control" mode is ON, " " is displayed
on the home screen. The "
" icon switches as "Capacity
Control Level" changes.
Capacity Control Level Icon
Low
Med
High
Set Value
Item No.
Icon