User Manual

3. Operation Method
15
No. Icon Description
12
This is the main remote controller setting.
Use the main remote controller to set the main capacity control setting.
In the case of a single unit, the main does not light up.
13
In communication with the indoor unit.
14
The on timer is set.
15
The off timer is set.
16
"GentleCool Comfort" mode is ON.
The icon switches as "GentleCool Comfort Level" changes: Low: , Med: , High:
17
"Capacity Control" mode is ON.
The icon switches as "Capacity Control Level" changes: Low: , Med: , High:
18 "Sleep Mode" is ON.
19
"AutoBoost" mode is ON.
20
"On Timer" is set in the operation schedule.
21
"Off Timer" is set in the operation schedule.
22 NFC mode is ON.
23 NFC mode is OFF.
(*1)
:
The default setting is cooling: set temperature +2.5°C, heating: set temperature -2.5°C.
If you want to change the corrective value for this setback operation, please contact the distributor for
more detailed information.
(*2)
:
It depends on the settings of the wired remote controller.