User Manual

3. Operation Method
11
3.4 Louver Swing Direction
1. This function is used to set the louver direction.
Step1. Press "
" (On/O). Make sure that the air conditioner
is ON. Press "
" and select "Louver Direction", refer to
"4. Menu Operation".
Step2. By pressing " " or " ", the louver direction changes as
the right diagram, and the direction of dierent types of
louver is displayed dierently.
: Auto swing operation starts. At this time, the
louver swings repeatedly on the LCD.
Step3. Press "
" to save the setting and return to the home
screen.
LCD Indication COOL, DRY HEAT, FAN
Auto-Swing
Range for COOL and DRY
Auto-Swing range for COOL and DRY
Range for HEAT and FAN
Auto-Swing range for HEAT and FAN
NOTES:
•
For the indoor unit without the auto louver mechanism, the indication of "Louver" is NOT available on the
LCD.
•
The air ow angle is dierent for each indoor unit type. Check for detailed information in each Operation
Manual for indoor unit.
•
The louver position on the LCD and the actual louver position may not match during the Auto-Swing.
To set the louver positions, set the angle aer checking the position on the LCD.
•
The louver may NOT stop immediately aer the button is pressed.