Operation Manual

54
Español
Item
Part Name
No.
57 Valve Bushing (B)
58 O-Ring (S-18)
59 O-Ring (S-14)
60 Valve Piston (B)
61 O-Ring (I.D 8.8)
62 O-Ring (I.D 11)
63 Plunger Spring
64 Plunger (A)
65 O-Ring (I.D 1.8)
66 Valve Bushing (A)
67 Shaft Ring
68 O-Ring (P-9)
69 Feed Piston
70 O-Ring (P-21)
71 Feed Spring
72 Bumper
73 Feed Piston Cover
74 Retaining Ring For D28 Hole
75 Magazine Bushing
76 Magazine Cover
77 Warning Label
78 Holder Cap (A)
79 Holder Shaft
80 Nylon Nut M4
81 Ratchet Spring
82 Nail Holder
83 Nylon Nut M5
84 Feeder Shaft Ring
85 Pin
86 Magazine
87 Washer M4
88 Spring Washer M4
89 Machine Screw M4×35
90 Magazine Ass'y
91 Guide Lock
92 Spring
93 Nail Guide
94 Roll Pin D3×8
95 Nail Stopper (A)
96 Stopper Spring
97 Nail Stopper (B)
98 Nail Guide Cover
99 Nylock Hex. Socket Hd. Bolt M4×10
100 Cover
101 Sleeve (B)
102 Label (D)
103 Nail Guide Shaft
104 Sleeve
105 Hex. Socket Hd.Bolt M5×16
501A Eye Protector
502 Case
503 Puneumatic Tool Lubricant (30CC)
504 Hex. Bar Wrench 3MM
505 Hex. Bar Wrench 4MM
506 Hex. Bar Wrench 5MM
Item
Part Name
No.
1 Hex. Socket Hd. Bolt M6×16
2Plate
3 Top Cover
4 Hex. Socket Hd. Bolt (W/Flange) M6×35
5 Exhaust Cover
6 Gasket (B)
7 Spring
8O-Ring (I.D 38.5)
9 Head Valve
10 O-Ring (I.D 52.6)
11 Head Valve Rubber
12 Exhaust Valve Rubber
13 Retaining Ring
14 Cylinder Plate
15 Cylinder O-Ring (I.D 68.3)
16 O-Ring
17 Cylinder
18 Piston Ring
19 O-Ring
20 Piston (H)
21 Retaining Ring (E-Type) For D6 Shaft
22 Warning Label
23 Body Ass'y
24 Name Plate
25 Piston Bumper
26 O-Ring (P-4)
27 Washer
28 Nose
29 Nylock High Tension Bolt M7×20
30 Roll Pin D3×20
31 Needle Roller
32 Roll Pin D4×14
33 Feeder Arm
34 Feeder Spring
35 Feeder
36 Spring
37 Pushing Lever (B)
38 Adjuster
39 Spring (C)
40 Steel Ball D3.97
41 Pushing Lever (A)
42 Washer
43 Hex. Socket Hd. Bolt M6×12
44 Nose Cap (A)
45 Grip Tape (A)
46 Tape
47 O-Ring (I.D 37.2)
48 Cap
49 Dust Cap
50 Machine Screw M5×25
51 Roll Pin D3×22
52 Roll Pin D3×28
53 Trigger (A)
54 Change Knob (B)
55 Pushing Laver Guide
56 Head Valve O-Ring (I.D 16.8)
Parts are subject to change without any obligation on
the part of the HITACHI due to improvements.