Operating Guide

8
English
OPERATION
NOTE: The information contained in this Manual is designed to assist you in the safe operation of the Nailer.
Some illustrations in this Manual may show details or attachments that diff er from those on your own Nailer.
NAME OF PARTS
Enlarged view of the valve part
Trigger
Change Rod
Lock Pin
Change
Stopper
Nailing operation switching device
Position of
Change Rod
Position of
Change Rod
SINGLE SEQUENTIAL ACTUATION
MECHANISM
CONTACT ACTUATION
MECHANISM
● When the lock pin is attached, the tool is fi xed to SINGLE
SEQUENTIAL ACTUATION.
● To operate in CONTACT ACTUATION, the lock pin should be removed
by following the steps in “How to Remove the Lock Pin” provided in the
“METHODS OF OPERATION”.
Piston
Piston O-ring
Exhaust Cover
Body
Cap
Air Plug
Valve Part
Ribbon Spring
Magazine Cover
Magazine Protector
Magazine Assembly
Nail Feeder
Outlet (Firing Head)
Push Lever
Guide Plate
Lock Lever
Nose
Driver Blade
000Book_NT65A5_US.indb 8000Book_NT65A5_US.indb 8 2018/05/11 10:24:302018/05/11 10:24:30