Operation Manual

English
9
Choose a suitable nail from Fig. Nails which are not shown in Fig. can not be driven with this tool.
[NR90GC]
Only smooth, barbed and ring type nails are used. Do not use screw nails. Nails are formed into strips which consist
of 25-37 nails.
[NR90GR]
The use of any other nails can result in tool malfunction and/or nail breakdown, leading to serious injuries.
Model NR90GC NR90GR
Type of power Piston reciprocating
Applicable nails ø 3.0 – 3.3 mm (.120" – .131") See Fig. ø 2.9 – 3.3 mm (.113" – .131") See Fig.
Numbers of loadable nails 25 – 37 nails (1 strips) 32 – 35 nails (1 strips)
Size
347 mm (L) × 353 mm (H) × 108 mm (W) 362 mm (L) × 353 mm (H) × 108 mm (W)
(13-21/32" × 13-29/32" × 4-1/4") (14-1/4" × 13-29/32" × 4-1/4")
Weight 3.5 kg 3.6 kg
Nail-feeding method Piston reciprocation
Ambient temperature 0°C to 40°C (32°F to 104°F)
Battery
EB714S ( 1.4 Ah 6 cells )
Ni-Cd battery, 7.2 V
Fuel cell
Type No. 753-600
........
sold separately
Liquid hydrocarbon; propane, butane 40g/80ml
SPECIFICATIONS
1. Gas Strip Nailer
NAIL SELECTION
2. Charger (UC7SD)
Input power source Single phase: AC 230 V 50 Hz
Charging time Approx. 60 minutes (At temperature of 20°C (70°F))
Charging voltage 7.2 V
Charging current 1.6 A
Weight 1.1 kg (2.4 lbs)
* This Nailer is not recommended for use with from 75 mm (3") to 90 mm (3-1/2") ring shank nails in pressured-
treated lumber.
NR90GC NR90GR
Paper collated strip nails Min. Max. Plastic-collated strip nails Min. Max.
Clipped-head nails Full-head nails
2.9 mm
(.113")
50 mm (2")
3.3 mm
(.131")
90 mm (3-1/2")
3.3 mm
(.131")
50 mm (2")
2.9 mm
(.113")
90 mm (3-1/2")
7 mm
(.286")
7.6 mm
(.3")
7.7 mm
(.303")
6.8 mm
(.266")