Operation Manual

For any help concerning set up and use of your TV please call the Customer Helpline: 0845 604 0105

Connections

Back connections explained

1. SCART socket

Inputs or outputs for external devices. Connect the

SCART cable between the SCART socket on the

TV and the SCART socket on the external device

(decoder, VCR or DVD player).

NOTE: If an external device is connected via the

SCART socket, the TV will automatically switch to AV

mode.

2. HDMI Input

Connects a device that has an HDMI socket.

The TV can display High Deﬁ nition pictures from

devices such as a High Deﬁ nition Satellite Receiver

or DVD Player. These devices must be connected

via the HDMI sockets or Component Socket. No

sound connection is needed for an HDMI to HDMI

connection (see page 18).

3. PC Input (VGA)

Connects a personal computer to the TV. Connect

the PC cable between the PC INPUT on the TV

and the PC output on the PC. You can use the

PC input to allow YPbPr signal connection with a

device that has component output. Connect the

YPbPr to PC cable(not supplied) between the PC

INPUT on the TV and the component video outputs

of the device.

4. RF Input (ANT.)

Connects to aerial (antenna) or cable TV. If you

use a decoder or a media recorder, you should

connect the aerial cable through the device to the

TV with an appropriate aerial cable.

NOTE: When using the wall mounting kit (optional),

we recommend that you plug all your cables into the

back of the TV before mounting on the wall.

5. S/PDIF Coaxial Out

Outputs digital audio signals of the currently

watched source.

Use an SPDIF coaxial cable to trasfer audio

signals to a device that has S/PDIF input.

01_MB60_ypbpr_[GB]_(TV-DVD)_IDTV (ARGOS)_NICKEL16_1910UK_26856W_10075067_5019XXXX.indd Ksm2:16 19.08.2011 00:02:31