Use and Care Manual

— 15 —

English

ADJUSTING THE NAILING DEPTH

To assure that each nail penetrates to the same depth, be

sure that:

1) the air pressure to the Nailer remains constant

(requlator is installed and working properly), and

2) the Nailer is always held firmly against the workpiece.

If nails are driven too deep or shallow into the workpiece,

adjust the nailing in the following order.

1 DISCONNECT AIR HOSE FROM NAILER.

2 If nails are driven too deep, turn the adjuster to the

shallow side.

If nails are driven too shallow, turn the adjuster to the

deep side.

3 Stop turning the adjuster when a suitable position is

reached for a nailing test.

4 Connect the air hose.

ALWAYS WEAR EYE PROTECTOR.

Perform a nailing test.

5 DISCONNECT AIR HOSE FROM NAILER.

6 Choose a suitable position for the adjuster.

Turn Adjuster

Flush

Too Shallow

Too Deep

Flush

Adjuster

Disconnect air hose

Turn Adjuster