HL19KN1/HL22KN1 LCD TV USER MANUAL Please read this manual carefully before using this TV set and leep it for future reference.
IMPORTANT SAFETY INSTRUCTIONS
HDMI
Connect video input from an external device to this jack. Connect audio input from an external device to these jacks.
1 1.Power SCAN HDMI 2 14 3.Not available 3 1 2 3 4 5 6 7 8 9 INPUT 4. Input selection 5.MENU 6.Volume/Channel Selection 15 0 16 MENU MUTE 5 17 OK VOL+ 18 7 10 11 12 13 CCD PIP SLEEP S.MODE MTS/SAP H.LOCK FREEZE SWAP MOVE 12.Not available 14.HDMI mode RECALL ARC 10.Close caption 13.Not available CHEXIT P.MODE 9.Select the aspect ratio 11.Select Mono/SAP/Stereo CH+ 6 VOL- 7.Exit On Screen Display 8.Adjust Picture Mode DISPLAY 4 8 9 2.SCAN FAVORITE 19 15.
SCAN HDMI 1 2 4 5 7 8 3 6 9 INPUT DISPLAY 0 MENU MUTE CH+ VOL- OK VOL+ CHEXIT P.MODE CCD PIP RECALL ARC SLEEP S.MODE MTS/SAP H.
Press H.LOCK to enter it and input the password correctly, the H.LOCK menu will appear on the screen(The initial password is 0000). Change password: The password can be changed. Press CH+/- to select Change password and VOL+/OK to enter. The screen will display New PW:----, then enter the new password and the screen display Confirm PW:----, if the same password is input correctly twice, the old password will be changed. Tuner Lock: The tuner can be locked. Press CH+/- to select.
In this manual, the OSD (On Screen Display) may be different from your TV s because it is just an example to illustrate the TV operation. Press INPUT to select the input source, and the menu for each source is different. 1. Press MENU button to display the main menu, and VOL+/-to select the main menu. 2. Press CH+/- to scroll through the parameters. 3. Press VOL+/- buttons to make changes to the parameters. 4. Press EXIT button to exit the menu.
Reset : Reset all settings to factory mode.
Reset : Reset all settings to factory mode.
Menu Language Selection: The menus can be shown on the screen in the selected language. First select your language. 1. Press MENU button and VOL+/- until the following menu appears on the screen. 2. Press CH+/- button to enter the function menu and to go up and down to select the desired option . 3. Press VOL+/- button to adjust the selected option to your preference . Functions: Language: This item displays the language of the OSD. Pic. Size: To select the display mode :4:3/Full/Zoom.
DNR: Digital Noise Reduction. Reduces the appearance of digitizing errors caused by compression. Press VOL+/- to select On or Off.
1. Press MENU and VOL+/- button until the following menu appears on the screen. Note: This menu is only appears in TV mode . 2. Press CH+/- button to enter the turning menu and to go up and down to select the desired option . 3.Press VOL+/- button to adjust the selected option to your preference . Functions: Channel Type: Press VOL+/- to select Air or cable. Color System: Press VOL+/- to select Auto/NTSC/PAL N/PAL M. Auto Search: Auto search and save the channel .
1. Press MENU and VOL+/- button until the following menu appears on the screen. 2. Press CH+/- button to enter the turning menu and to go up and down to select the desired option . 3.Press VOL+/- button to adjust the selected option to your preference. Functions: Clock: Set the Correct time. Time Off: Set the time that the TV goes off automatically. Time On: Set the time that the TV comes on automatically. Book Channel: Set the channel that the TV comes on automatically.
1. Press MENU and VOL+/- button until the following menu appears on the screen. Note: This menu is only appears in PC mode . 2. Press CH+/- button to enter the adjust menu and to go up and down to select the desired option . 3.Press VOL+/- button to increase and decrease the level to adjust the selected option to your preference . Functions: H-Position: Picture horizontal position adjust. V-Position: Picture vertical position adjust. Clock : Adjust the TFT-LCD to match the PC input source.
19 22 PAL M, PAL N, NTSC M 2.5W+2.
V0.
