Manual

English I
DOUBLE INSULATION FOR SAFER OPERATION
To ensure safer operation of this power tool, HITACHI has adopted a double insula-
tion design. "Double insulation" means that two physically separated insulation sys-
tems have been used to insulate the electrically conductive materials connected to
the power supply from the outer frame handled by the operater. Therefore, either the
symbol "i-all"or the words and "Double insulation "appear on the power tool or on the
nameplate.
Although this system has no external grounding, you must still follow the normal
electrical safety precautions given in this instruction Manual, including not using the
power tool in wet environments.
To keep the double insulation system effective, follow these precautions:
_ Only HITACHI AUTHORIZED SERVICE CENTER should disassemble or assem-
ble this power tool, and only genuine HITACHI replacement parts should be
installed.
_ Clean the exterior of the power tool only with a soft cloth moistened with soapy
water, and dry thoroughly.
Never use solvents, gasoline or thinners on plastic components; otherwise the
plastic may dissolve.
SAVE THESE INSTRUCTIONS
AND
MAKE THEM AVAILABLE TO
OTHER USERS OF THiS TOOL!