Manual

English
DEPRESSED CENTER WHEEL ASSEMBLY AND DISASSEMBLY
WARNING : Never attempt to assemble or disassemble the depressed
center wheel while the grinder is capable of being
turned"on".
Be sure power switch is in the "OFF'position and the elec-
trical cord has been disconnected from the receptacle.
1,
Assembling
(1) Turn the disc grinder upside-
down so that the spindle is fac-
ing upward.
(2) Align the oval-shaped indenta-
tion of the wheel washer with
the notched part of the spindle,
then attach them.
(3) Fit the protuberance of the
depressed center wheel onto
the wheel washer.
(4) Screw the wheel nut onto the
spindle.
(5) While pushing the push button
with one hand, lock the spindle
by turning the depressed center
wheel slowly with the other
hand.
Tighten the wheel nut by using
the supplied wrench as shown
in Fig.3.
Wrench ....
Wheel Nut
i
Depressed Center . /_"
Wheel
Wheel Washer i
0
Spindle !
Wheel Guard .... ii
Push Button "....." ....
Fig. 3
z_CAUTtON " Tighten the wheel nut securely and confirm that the depressed
center wheel does not wobble.
2. Disassembling
To remove the depressed center wheel, follow the above-mentioned procedure in
reverse order.
13