Operation Manual
English
9
WARNING
If a conductive foreign matter enters in the terminal of lithium
ion battery, the battery may be shorted, causing fi re. When
storing the lithium ion battery, obey surely the rules of
following contents.
APPLICATIONS
○ Drilling of brick and concrete block, etc.
○ Driving and removing of machine screws, wood screws,
tapping screws, etc.
○ Drilling of various metals.
○ Drilling of various woods.
BATTERY REMOVAL/INSTALLATION
1. Battery removal
Hold the handle tightly and push the battery latch (2 pcs.)
to remove the battery (see Figs. 1 and 2).
CAUTION
Never short-circuit the battery.
2. Battery installation
Insert the battery while observing its polarities (see
Fig. 2).
CHARGING
Before using the power tool, charge the battery as follows.
1. Connect the charger’s power cord to the receptacle.
When connecting the plug of the charger to
a receptacle, the pilot lamp will blink in red
(At 1-second intervals).
2. Insert the battery into the charger.
Firmly insert the battery into the
charger as shown in Fig.
3, 4.
3. Charging
When inserting a battery in the charger, the pilot lamp will
light up continuously in red.
When the battery becomes fully recharged, the
pilot lamp will blink in red (At 1-second intervals).
(See Table 1)
(1) Pilot lamp indication
The indications
of the pilot lamp will be as shown in
Table 1, according to the condition of the charger or the
rechargeable battery.
○ Do not place conductive debris, nail and wires such
as iron wire and copper wire in the storage case.
○ To prevent shorting from occurring, load the battery
in
the tool or insert securely the battery cover for
storing until the ventilator is not seen (See Fig. 1).
SPECIFICATIONS
POWER TOOL
Model DV14DSFL DV18DSFL
No-load speed (Low/High) 0 – 400 / 0 – 1500 min
-1
0 – 400 / 0 – 1500 min
-1
No-load impact rate (Low/High) 0 – 5600 / 0 – 21000 min
-1
0 – 5600 / 0 – 21000 min
-1
Capacity
Drilling
Brick
(Depth 30 mm)
13 mm 13 mm
Wood
(Thickness 18 mm)
32 mm 38 mm
Metal
(Thickness 1.6 mm)
13 mm 13 mm
Driving
Machine screw 6 mm 6 mm
Wood screw
8 mm (diameter) × 50 mm (length)
(Requires a pilot hole)
8 mm (diameter) × 75 mm (length)
(Requires a pilot hole)
Rechargeable battery
BSL1415: Li-ion 14.4 V (1.5 Ah 4 cells)
BSL1815: Li-ion 18 V (1.5 Ah 5 cells)
Weight
1.6 kg 1.7 kg
CHARGER
Model UC18YGSL
Charging voltage 14.4 – 18 V
Weight 0.4 kg
STANDARD ACCESSORIES
DV18DSFL
1 Plus driver bit (No. 2) .............................. 1
2 Charger (UC18YGSL) ............................1
3 Battery (BSL1815) .................................. 2
4 Plastic case ............................................1
5 Battery cover ..........................................1
DV14DSFL
1 Plus driver bit (No. 2) .............................. 1
2 Charger (UC18YGSL) ............................1
3 Battery (BSL1415) .................................. 2
4 Plastic case ............................................1
5 Battery cover ..........................................1
Standard accessories are subject to change without notice.
OPTIONAL ACCESSORIES (sold separately)
1. Battery (BSL1415)
(For DV14DSFL)
2. Battery (BSL1815)
(For DV18DSFL)
Optional accessories are subject to change without notice.
000Book_DV14DSFL_WE.indb 9000Book_DV14DSFL_WE.indb 9 2011/03/23 12:00:462011/03/23 12:00:46