Operation Manual

– 3 –
HOW TO OPERATE
TO ASSEMBLE HOSE
The hose and joint pipes are packed individually.
To put them together, insert the curved joint pipe
1 and joint pipe 2 into each end of the hose 3
until the claws 4 of the stopper ring 5 click into
the holes 6 of the curved joint pipe and joint pipe.
使用說明
安裝吸塵管
吸塵管和連接管是獨立包裝的。進行安裝時，請
將連接彎管1和連接管2分別接入吸塵管3的兩
端，直到止動環5的連接牙4卡入連接彎管和連
接管的連接洞6之中。
Fig. 3 To attach hose to cleaner
圖3 將吸塵管與吸塵器主機連接
Fig. 2 To assemble hose
圖2 安裝吸塵管
1
2
3
5
3
4
6
TO ATTACH HOSE TO CLEANER
Insert the joint pipe 2 into suction inlet 7 of the
cleaner. When you want to remove the hose 3,
press the button 8 and pull out the joint pipe 2.
將吸塵管與吸塵器主機連接
將連接管2插入吸塵器主機的吸氣入口7。 要抽
出吸塵管3，請按住按鈕8，然後拉出連接管
2。
2
8
37
12
3
45
6
27
3
82
02/CV-S950_02-11(CS) 15/10/03, 5:44 PM3