User`s manual

27
Operating
Selecting an aspect ratio
 For a computer signal
CP-X8150, CP-X8160:
NORMAL  4:3  16:9  16:10
CP-WX8240, CP-WX8255, CP-WX8240A, CP-WX8255A, CP-SX8350,
CP-WU8440, CP-WU8450:
NORMAL  4:3  16:9  16:10  NATIVE
 For a video signal, s-video signal or component video signal
CP-X8150, CP-X8160:
4:3  16:9  14:9
CP-SX8350:
4:3  16:9  14:9  NATIVE
CP-WX8240, CP-WX8255, CP-WX8240A, CP-WX8255A, CP-WU8440,
CP-WU8450:
4:3  16:9  16:10  14:9  NATIVE
 For an input signal from the LAN, USB TYPE A or USB TYPE B ports, or
if there is no signal
CP-X8150, CP-X8160, CP-SX8350: 4:3 (fixed)
CP-WX8240, CP-WX8255, CP-WX8240A, CP-WX8255A, CP-WU8440,
CP-WU8450:
16:10 (fixed)
1.
Press ASPECT button on the remote control.
Each time you press the button, the projector switches
the mode for aspect ratio in turn.
 For an HDMI
TM
signal
CP-X8150, CP-X8160:
NORMAL  4:3  16:9  16:10  14:9
CP-WX8240, CP-WX8255, CP-WX8240A, CP-WX8255A, CP-SX8350,
CP-WU8440, CP-WU8450:
NORMAL  4:3  16:9  16:10  14:9  NATIVE
ASPECT
button
• ASPECT button does not work when no proper signal is inputted.
• NORMAL mode keeps the original aspect ratio setting.
NOTE