PLASMA Display CMP307XU 37” High Resolution XGA ◆ High resolution XGA (1024 x 768) ◆ 4:3 aspect ratio ◆ 160 degree viewing angle ◆ Theater operation (capable of 16 million colors) ◆ Multiscan capability (PC Analog RGB) ◆ Standard video inputs (BNC, s-video) ◆ Built-in screen saver ◆ Internal speakers
37-Inch High Definition Plasma Display Model CMP307XU External dimensions General 34.8" Power supply Frequency Power consumption Dimensions Weight AC100~120V 50/60Hz 34.8" (W) x 26.9" (H) x 3.9" (D)(excluding stand) 65 lbs., 9 ozs. (excluding stand) Signal input and terminals Video Analog (PC) RGB 1 30.1" 26.9" 390W (typical) Display characteristics Effective display area Aspect ratio Number of pixels Pixel pitch Number of colors (gray levels) Brightness Contrast ratio Viewing angle 29.
FEATURES The following features are provided by the color Plasma Display Monitor. ENGLISH Large-screen, high-definition plasma display panel The 37-inch color plasma display panel, with a resolution of 1024 (H) x 768(V) pixels, creates a high-definition, large-screen (aspect ratio : 4:3) and low-profile flat display. Free from electromagnetic interferences from geomagnetic sources and ambient power lines, the panel produces high-quality display images free from color misconvergence and display distortion.
CONTENTS ENGLISH FEATURES CONTENTS SAFETY GUIDELINES INSTALLATION INSTRUCTIONS Standard accessories Installation Anti-tumble measures Component Names Installation and Cabling Handling the Remote Controller OPERATING INSTRUCTIONS Turning Power On and Off Input Selection Volume Adjustment Contrast Adjustment Sound Mute Input Signal Status Display On-Screen Display System, EasyMenu OTHER FEATURES Automatic Store Reset (Settings Initialization) Signal Check Switching the Display Method Power Save Mode Sound
SAFETY GUIDELINES ENGLISH This monitor is designed to be safe to use. However, due to high voltage of about 400 V, fire or serious injury may occur unless you use this monitor in correct way. You are strongly suggested to follow the instruction shown below in order to avoid such injury.
SAFETY GUIDELINES(continued) Warning Fire or electric shock may cause death or serious injury unless you follow the instruction below. ENGLISH ● If something smells strange or smoke comes from the monitor: Turn off the monitor and disconnect the power plug from the power point immediately. Contact service center after confirming that the smoking has stopped. If you continue to operate the monitor with such abnormal condition, it may cause fire or you may receive an electric shock.
Electric shock or other accidents may cause serious injury or damage to your property. ENGLISH Caution ● You must to check the user manual of the computer when you connect to the monitor. The weight of the monitor or obstructing the ventilation hole of the computer equipment may cause distortion or damage of the computer equipment. ● Disconnect the power plug from the power point when you carry the monitor.
SAFETY GUIDELINES(continued) Precautions ENGLISH ● Installation environment Do not obstruct a ventilation hole. Do not put the monitor on carpet or blanket, or near a curtain which has a possibility of obstructing a ventilation hole of the monitor. Do not put the monitor in the following places. ◆ Hot places such as near heater, place exposed to the direct rays of the sun. ◆ A place where the temperature is widely changing. ◆ Places with soot, dust or high humidity. ◆ Poor air ventilation place.
INSTALLATION INSTRUCTIONS Standard accessories ENGLISH ● This product is complete with the display monitor, plus the accessories shown below. If any of these accessories is missing, please contact your dealer. Color Plasma Display Monitor USER MANUAL MANUEL UTILISATEUR CMP307EU with EasyMenu! EasyMenu is HITACHI's On Screen Display function for easy operation. M4 screw x 2 READ THE INSTRUCTIONS INSIDE CAREFULLY. KEEP THIS USER MANUAL FOR FUTURE REFERENCE.
INSTALLATION INSTRUCTIONS (continued) Component Names ENGLISH Front Panel Cabinet (front frame) Stand Control panel ■ The Adjustment button is located on the bottom.
ENGLISH Rear Power cable connector 10 Main power switch 13 External device connection terminals AUDIO RGB2 [ BNC ] AUDIO RGB1 L V H B G R [ D-SUB ] RGB input terminals AUDIO (MONO) (MONO) R VIDEO1 INPUT VIDEO2 INPUT [COMPONENT] RGB INPUT RS232C IN R 10 L (MONO) PR/CR PB/CB Y R L VIDEO S-VIDEO VIDEO input terminals 11 Remote controller POWER button 13 POWER RECALL RECALL button 15 MUTE button 15 14 RGB/VIDEO button 14 VOLUME button 15 SELECT button RGB/ VIDEO
INSTALLATION INSTRUCTIONS (continued) Installation and Cabling ENGLISH Connecting to the PC Read Usage Notes ( 3 to 6 ) carefully to ensure maximum safety before proceeding to these steps: (1) Make sure that the display signals produced by your PC meet the specifications of this product. For the specifications of this product, see Product Specifications ( 28 to 30 ). (2) Choose an appropriate site and install the product on a level table where the stand is secure.
(such as a video disc player, a DVD player, or a video camera) Read Usage Notes ( 3 to 6 ) carefully to ensure maximum safety before proceeding to these steps: (1) Choose an appropriate site and install the product on a level table where the stand is secure. ENGLISH Connecting to Video Equipment Install the monitor to have ready access to a power socket available. (2) Make sure that the monitor’s power switch is off. The monitor is shipped with the power switch off.
INSTALLATION INSTRUCTIONS (continued) Handling the Remote Controller ENGLISH Loading Batteries (1) Open the battery cover. Slide the battery cover towards the arrow mark while pressing it. (2) Load batteries. Load two Size AA batteries included observing the correct polarities. When replacing the batteries, always use the R6P AA (or SUM-3) type. (3) Close the battery cover. Slide back the battery cover towards the arrow mark.
OPERATING INSTRUCTIONS To turn on the set power supply, set the MAIN POWER switch ( ) of the main unit to ON and then press the SUB POWER button ( ) or the POWER button of the remote control. To turn off the set power supply, press the SUB POWER button ( ) of the main unit or the POWER button of the remote control, then set the MAIN POWER switch ( ) to OFF.
OPERATING INSTRUCTIONS (continued) Input Selection ENGLISH Press the RGB/VIDEO button on the remote controller or the unit to switch the input in the sequence of RGB1 ➝ RGB2 ➝ VIDEO1 ➝ VIDEO2 ➝ RGB1. The kinds of input for which SKIP has been selected with the on-screen display system, EasyMenu ( 21 ), are skipped.
While the on-screen display system, EasyMenu 16 , is not on display, press the remote controller SELECT button or to adjust the contrast. When you press these buttons, the status of contrast adjustment and the input horizontal (H) and vertical (V) frequencies of the input signal will be displayed in a guidance image. While the guidance is on display, press the key to narrow the difference between darkness and brightness.
OPERATING INSTRUCTIONS (continued) On-Screen Display System, EasyMenu ENGLISH Press the MENU button to open an adjustment menu allowing you to complete various adjustments and settings using the SELECT buttons (remote controller , , , and keys, or the set SELECT key). Pink Press the SELECT buttons (remote controller and keys) to move the pink marker to select an item.
Menu item PICTURE (in RGB is selected) Selected characters Adjustment item Setup hint A Black is set off for Adjust to prevent increased overall black from brightness. spreading across the screen. CONTRAST Contrast BRIGHTNESS Brightness Black is subdued for increasedoverall darkness. COLOR SELECT Color mode COOL ↑ NORML ↑ WARM ↑ USER R-GAIN Red gain Red is weakened. Red is strengthened. Green is strengthened.
OPERATING INSTRUCTIONS (continued) Adjustment Item List (continued) ENGLISH Menu item PICTURE (in VIDEO is selected) Selected characters Adjustment item CONTRAST Contrast Narrows the gap between brightness and darkness. Broadens the gap between brightness and darkness. Adjust for maximum visibility to suit the ambient brightness. BRIGHTNESS Brightness Black is subdued for increased overall darkness. Black is set off for increased overall brightness.
Selected characters Adjustment item Setup hint NORMAL ↔ FULL NORMAL DISPLAY AREA DISPLAY (in RGB is selected) H.POSITION V.POSITION CLOCK SXGA signal Display vertical area frequency 60Hz during reception ( ) NORMAL NORMAL UP/LF UP/LF UP/RI UP/RI DW/LF DW/LF DW/RI DW/RI CENTER CENTER ↑ ↑ ↑ ↑ ↑ ↓ ↓ ↓ ↓ ↓ Moves the horizontal position to left. Moves the horizontal position to right. Moves down the vertical position. Moves up the vertical position.
OPERATING INSTRUCTIONS (continued) Adjustment Item List (continued) ENGLISH Menu item Selected characters Adjustment item Setup hint ENGLISH (E) ENGLISH (E) DEUTSCH (D) DEUTSCH (D) ESPAÑOL (N) ESPAÑOL (N) ↑ LANGUAGE Language selection ↑ ↑ ↓ ↓ ↓ ITALIANO (I) ITALIANO (I) FRANÇAIS (F) FRANÇAIS (F) ↑ ↓ FUNCTION AUTO FREQ. HALFTONE FUNCTION (in RGB is INTERPOLATION selected) Input status Set to OFF. automatic display Set to ON.
INPUT SELECT F M U N A I C T I N O N Selected characters Adjustment item RGB1 INPUT RGB1 input selection RGB2 INPUT RGB2 input selection VIDEO1 INPUT VIDEO1 input selection VIDEO2 INPUT VIDEO2 input selection RGB1 SOUND RGB1 audio RGB2 SOUND RGB2 audio Setup hint Sets to SKIP. Do not select when switching inputs. Sets to SELECT. Select when switching inputs. Setting an unused jack to SKIP can accelerate switching speed.
OTHER FEATURES Automatic Store ENGLISH Approximately 1 sec. after adjustment is completed, the adjustments will be recorded as shown in the table below. Item Display Sound volume Sound balance Treble Bass Mute volume Input status automatic display Half tone Enlargement Line correction Three-dimensional Y/C separation HD signal Input select VOLUME BALANCE TREBLE BASS MUTE VOLUME EASY MENU HALF TONE INTERPOLATION LINE CALE 3D Y/C COMPONENT INPUT SELECT One set can be recorded.
The Easy Menu shown to the right will be displayed when the INITIALIZE? SELECT button is used to select DISPLAY and moreover DISPLAY INT is selected from the On-screen Display YES NO System Easy Menu 16 during RGB1/RGB2 input. If the key (select Yes) of the SELECT button is pressed at this time, the user adjustment values in the table below for the signal currently being received will be deleted and the factory settings will be restored.
OTHERFEATURES (continued) Switching the Display Method ENGLISH ●The display method can be switched by changing the settings of the display area (when the RGB input jack is selected) or display size (when the Video input jack is selected).
When the RGB input jack is selected This unit meets the power-saving requirements of VESA and International Energy Program. When this unit is connected to a VESA DPMS computer, the Power Save (Standby/Suspend/Off) mode can be set to be activated automatically when the computer is not being used to reduce power consumption by this unit.
TROUBLESHOOTING Symptoms That Seemingly Appear to be Failures ENGLISH ● Make the checks suggested below depending on the symptoms observed. If the symptoms remain uncorrected, contact your dealer. ■ Customer servicing can be hazardous. Symptom Point to check ● The screen appears blank with the power-indicating lamp off. →Check the way the power cable is connected. →Make sure the main power switch is on. →Press the power switch. ● The message “POWER SAVE” is displayed. No sync signal is detected.
When RGB input is selected, the display screen may not be normal in some cases, depending on the system devices connected. When this happens, always make the following adjustments. Symptom 1 Text displayed across the screen appears vertically streaked, with some characters blurred (display 1). The display image appears flowing (display 2) (RGB input). Display 1 Vertical streaks ABCDEFGHIJ abcdefgABCDEFGabcd ABCDEFGHIJ abcdefgABCDEFGabcd Before adjustment Some characters are blurred.
PRODUCT SPECIFICATIONS Product specifications and designs are subject to change without notice. ENGLISH General Specifications Type CMP307XU Effective screen size Approx. 37inches, Aspect ratio 4:3 (753 mm (H), vertical 564 mm (V)) No. of pixels 1024 (H) x 768 (V) pixels Plasma Display Panel Pixel pitch 0.735mm (H) x 0.735mm (V) Display color 2,090,000 colors / 16,700,000 colors adjustment Brightness / 150cd/m2 (brightness) at white peak; 400: 1 (standard) in a dark room.
RGB terminal (D-sub 15-pin connector) Pin Input signal 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 R. video G. video or SYNC. on Green B. video No connection No connection R.GND G.GND B.GND No connection GND No connection Bi-directional Data (SDA) H. sync or H/V composite sync V.sync.
PRODUCT SPECIFICATIONS (continued) Recommended Signal List ENGLISH Screen controls are factory-preset for the following signal modes (RGB input): Signal mode No. Horizontal Dot clock frequency (kHz) frequency (MHz) Remarks Resolution Vertical frequency (Hz) 640 X 400 70.08 31.47 25.18 2 640 X 480 59.94 31.47 25.18 3 640 X 480 72.81 37.86 31.50 4 640 X 480 75.00 37.50 31.50 5 800 X 600 56.25 35.16 36.00 SVGA 6 800 X 600 60.32 37.88 40.00 SVGA 7 800 X 600 72.19 48.
