Operation Manual

25
GB
Specifi cations
External dimentions : Without cutting wheel
Length × Width × Height mm 740 × 250 × 385
Mass : Without cutting wheel and empty tank kg 11.5
Volume :
Fuel tank mL (cm³) 640
Fuel (Mixture ratio) Regular grade petrol.
Minimum 89 Octane unleaded
petrol is recommended.
Do not use fuel containing methyl
alcohol or more than 10 % of ethyl
alcohol.
50 : 1 (2 %) for ISO-L-EGD
Standard (ISO/CD 13738), JASO
FC, FD grade.
Engine :
Type Air cooled 2-cycle single cylinder
Carburettor WALBRO diaphragm type with
speed limiter, Inner vent type
Magneto Flywheel magneto, CDI system
Spark plug NGK BPMR7A
Starter Recoil starter
Power transmission Automatic centrifugal clutch
Engine displacement mL (cm³) 66.8
Maximum shaft brake power (ISO 7293) kW 3.0
Rated speed (ISO 7293) r/min 8000
Recommended speed with cutting attachment r/min 9000
Recommended speed at idling r/min 2700
Throttle control Throttle trigger with throttle lockout
and throttle latch
Fuel consumption :
Fuel consumption at maximum engine power kg/h 1.6
Specifi c fuel consumption at maximum engine power g/(kW
•
h) 537
Sound pressure level : (EN ISO 19432) LpAeq = dB(A) 98.2
Sound power level : (EN ISO 19432) LwAeq = dB(A) 107.2
Guaranteed sound power level :
(2000/14/EC) LWA = dB(A) 111
Vibration : (EN ISO 19432) Declared values a
hv,eq
=
Front handle m/s² 8.9
Rear handle m/s² 8.0
Cutting device :
Belt BANDO 6PJ887
Pulley ratio 2.29 : 1
Belt tensioner Spring
Cutting wheel mm 355 × 4 × 20
mm (355 × 4 × 22 with adapter)
Flange outside diamater mm 105
Wheel fastener tightening torque N
•
m20
Maximum spindle speed rating r/min 4400
Other device :
Vibration reduction system Rubber isolaters mounted the
engine and the handles
Air cleaner 3 stage type: sponge fi lter, bellows
type paper fi lter and nylon mesh
fi lter
Option : Water kit
* Technical data subject to change without notice.
CM14E_WE_all.indb 25CM14E_WE_all.indb 25 2008/02/05 21:09:342008/02/05 21:09:34