Operation Manual
24
English
δΆ‡ Information about power supply system of nominal
voltage 230 V~
Under unfavorable mains conditions, this power tool
may cause transient voltage drops or interfering voltage
fluctuations.
This power tool is intended for the connection to a
power supply system with a maximum permissible sys-
tem impedance Z
MAX
of 0.35 Ohm at the interface point
(power service box) of the user's supply.
The user has to ensure that this power tool is connected
only to a power supply system which fulfills the
requirement above.
If necessary, the user can ask the public power supply
company for the system impedance at the interface point.