Operation Manual

GB-20
Playing Repeatedly (MP3 disc)
ONE, ALB and ALL repeat play can be set by pressing the Mode button (
MODE
).
First press : To repeat the same track, the words “
TRK
” and “
REP
” will blink.
Second press : To repeat playing album, the words “
TRK
” will stay lit and “
REP ALB
” will blink.
Third press : To repeat playing all tracks on a disc, the words “
TRK
” will stay lit and “
REP ALL
”
will blink.
Fourth press : To play tracks randomly, the words “
TRK
” will stay lit and “
SHUF
” will blink.
Fifth press : To cancel the repeat playing, the word “
SHUF
” will disappear.

Repeat A-B can be set by pressing the repeat A-B button (
A-B
).
First press : Select the start point, the words “A-” will stay lit.
Second press : Select the end point, the words “A-B” will stay lit.
Third press : To cancel repeat play, the words “A-B” will disappear.
Note: A-B repeat function can only be used within the same track.
Use the USB
By connecting an USB mass storage device (including USB ash
memory, USB ash players or memory cards) to this unit, you can
enjoy the device's stored music through the unit.
1. Insert the USB device's USB plug into the
socket on the
front of unit.
2. Press the USB button (
USB
) on remote control or rotate the
function select button on the Amplier to select the USB
function. The word “USB” will be displayed on the front panel.
3. The device's stored music will be played automatically.
4. When you store more than one folder in the USB ash, use the
a bum up button (
ALB+
) or album down button (
ALB-
) on the
remote control to select the next/previous folder. Then choose
the track with the next button (
G
) or previous button (
H
) to
play the folder.
5. The player support the USB music le format of MP3, WMA only.
For devices with USB Cables:
1. Insert one plug of the USB cable (not supplied) to the socket on the unit.
2. Insert the other plug of the USB cable to the USB output terminal of the USB device.
For memory Cards:
1. Insert the memory card into a card reader (not supplied).
2. Use a USB cable (not supplied) to connect the card reader into the
socket on the unit.
USB Storage Device Data Protection

Always insert the USB device in the correct direction. Failure to do so may result in damage
to the USB device and this unit.

Do not remove the USB device while it is being accessed.

Electrical interference and electrostatic discharges may cause the USB device to malfunction
and suffer damage, resulting in data loss.
It is strongly recommended that any important data is backed up on a PC to protect against corrup-
tion, data loss or device malfunction. Please note that our company shall not accept any liability for
damage or loss of stored data.
Note: USB connection is not compatible with all hard drive models.
01_AXM649BT_GB_P41013409-A101_20 Mar 13.indd 20 2013-3-20 9:44:23
Downloaded from www.vandenborre.be