Manual

57" DISASSEMBLY/ASSEMBLY INSTRUCTIONS
2 - RE-ASSEMBLY PROCEDURE
To re-assemble the set, lift the top portion and align onto the
bottom cabinet. Gently lower the top portion until it sits flush
on the bottom.
_f_9_ Re-install the joint connector bolts (4 pcs.) that were removed
m step 5 of the disassembly.
STEP 10 Re-install the top (4) four screws into the lower rear cover, see (a). Re-install the (4) four side screws that hold the back cover to the cabinet, see
(b).
(a)
(b)
STEP 11 Re-connect the sensor connector to the sensor board, see (a). Re-install the sensor box, see (b).
(a) (b)
ISTEP12]
(a) _} ®
Re-install 4 screws ((T),@,(_,(_)) that hold the screen frame
to the cabinet on the Right side, see (a) and (b). Repeat to
re-install 4 screws on the Left side.
@ Q (b)
Please re-install 3 screws
[STEP 131 (@,@,®) below screen
frame that hold the back
cover to the cabinet as
the arrows shows.
Please re-install 3 screws
((_),(_),(_) below screen
frame that hold the back
cover to the cabinet as the
arrows shows.
(a) Left Side (b) Right Side
I STEP 14] Re-install both of the front decoration panels, see (a) and (b). Re-install the speaker grille, aligning it with the bottom cabinet, see (c). This com-
pletes the Disassembly and Assembly instructions.
(a) (b) (c)
73