Manual

AUDIO
Advanced
Settings
Use ADVANCED SETTINGS to improve the sound performance of your TV, depending on listening conditions.
II SOUFId [l_l_l_emefit
CURSOR
O2nd Audio Prog
Press CURSOR • or • to highlight a function. Press the SELECT button to select the function setting. When the function has a ",/" in
the box it is ON.
Audio Source
Multi-Channel Television Sound will allow you to select STEREO (a stereo broadcast), MONO (monaural sound) used when receiving a
weak stereo broadcast or SAP (second audio program) which may be a secondary language, weather report, etc.
The mode you select will be displayed at the left edge of the TV. The source received will be displayed above the mode. See example
below for each selection when both stereo and second audio are received (monaural is always received).
STEREO SELECTED
Audio
Selected ------_ _
SAP SELECTED
MONO SELECTED
Audio J
Broadcast "
Internal Speakers
On - Select this feature if using the internal speakers only,
Off - Select this feature if you prefer to use only speakers from a separate stereo system.
Auto Noise Cancel
This function eliminates the noise between stations. If a channel is tuned and is noisy, this function will automatically eliminate the audio
for that channel.
Perfect Volume
This function will automatically adjust volume so each channel has the same average volume level.
Loudness
This function will improve the quality of both low and high frequency sounds when listening at low volume levels.
41