User Guide

- 10 -
If you do not accept the locations and / or the
programme names of programmes, you can
change them in Programming menu. For de-
tails see Programming menu on page 26.
To display channel list in IDTV, switch to the
IDTV via pressing DTT/TV button. Then
press
button to enter main menu, Chan-
nel List will be highlighted press OK button
to enter the menu. For detailed information
see page 13.
Operating The TV
You can operate your TV using both the re-
mote control handset and the buttons on the
set.
Operating with the buttons on the
TV set
Volume setting and programme selection
can be made by using the buttons on the
control panel at the right side of the TV.
Volume Setting
Press the-
button to decrease volume
or the
+ button to increase volume, so
a volume level scale (slider) will be displayed
at the bottom of the screen.
Programme Selecting
Press the P+ button to select the next
programme or the -P button to select the
previous programme.
Entering The Menu
Press the
button on the control panel at
the side of the TV to enter the menu.
/ and + / - buttons on the TV
are used as navigation buttons in menu.
AV Mode
Press the AV button on the control panel at
the side of the TV to switch your TV to AV
modes.
Operating With Remote Control
The remote control handset of your TV is de-
signed to control all the functions of your TV.
The functions will be described in accor-
dance with the menu system of your TV.
Functions of the menu system are described
in Menu System section.
Volume Setting
Press the
button to increase volume.
Press the
button to decrease volume. A
volume level scale (slider) will be displayed
at the bottom of the screen.
Programme Selecting
(Previous or next programme)
 Press the P- button to select the previous
programme.
 Press the P+ button to select the next
programme.
Programme Selecting (direct access):
Press digit buttons on the remote control
handset to select programmes between 0
and 9. The TV will switch to the selected
programme after a short delay.
 For a two digit programme number enter the
second digit after pressing the first digit within
2 seconds.
1-ENG-3730W-HL02126UK-37 INCH-(LG)-PEU_IDTV-NEW SOFT-50090756.p65 21.07.2006, 16:4210