Manual

HOOK-UP CABLES AND CONNECTORS
Most video/audio connections between components can be made with shielded video and audio cables that have
phono connectors. For best performance, video cables should use 75-ohm coaxial shielded wire. Cables can be
purchased from most stores that sell audio/video products. Below are illustrations and names of common connectors.
Before purchasing any cables, be sure of the output and inputconnector types required by the various components. Also
make sure the cables are the correct length.
L
300-Ohm Twin Lead Connector
Thisoutdoorantennacable mustbe connectedtoan antennaadaptor(300-Ohm to75-Ohm).
"F" Type 75-Ohm Coaxial Antenna Connector
ForconnectingRF signals(antennaor cable TV) to theantennajack onthetelevision.
Phono Connector
Used on all standard video and audio cables which connect to inputs and outputs located on the Television's front and
rear jack panels.
S-Video (Super Video) Connector
Thisconnector isusedoncamcorders, VCR's,andlaserdiscplayerswithanS-Videofeature inplaceofthestandardvideo
cableto producea high-qualitypicture,