Manual

AUDIO

INT. SPEAKERS

This function is useful when first setting up the external speakers, or ifyou prefer to use only speakers from a separate

stereo system. This feature is used to turn the internal speakers "ON" or "OFF", when the Receiver is connected to an

External Audio Amplifier. This function allow the user totum offthe TV speakers. Therefore, no sound will be emitted from

them. This function is useful when first setting up the external speakers, or if you prefer to use only speakers from a

separate stereo system.

Forexternalspeakerwith Internal/Externalswitch,soundreproductionisas follows. (For 35UX60B Only.)

TELEVISION ON SCREEN DISPLAY AND REAR SPEAKER CONNECTION

(_ On Screen DisplayInt.Speaker: "ON"..and-

Rear Switchto Int.: InternalSpeakeris =ON"-or-

Rear Switchto EXt.: ConnectExt. Speakerfirst or no soundwill be heard. Externalspeakerin "ON'.

MTS:MONO SAP STEREO

DYNAMIC BASS.ON OFF

LOUDNESS: ON OFF

INT.SPEAKERS: ON OFF

ENTER MENU

(SET) (EXIT)

* DOLBY SURROUND

INTJEXT. SPEAKERS

* Dolby surround J When switch to

for 35UX60B is [ Int., "built in"always "ON'. speaker is "ON'.

MTS:MONO SAP STEREO

DYNAMIC BASS.ON OFF

LOUDNESS: ON OFF

INT.SPEAKERS: ON OFF

<1_ ENTER MENU

(SET) (EXIT)

* DOLBY SURROUND INTJEXT. SPEAKERS

B_ ONLY

INT.

I1_1 Ex'r

" Dolby surround J When switch to

for 35UX60B is I Ext. - connect analways "ON". Ext. speaker first

or no sound will

be heard. Ext.

speaker is "ON".