Manual

AUDIO SYSTEM SET-UP 14 ]
jack.
3. Press the INPUT button to view the program from the VCR or laserdisc player. The VIDEO mode disappears
automatically after approximately eight seconds.
4. Press the INPUT button to return to the previous channel.
Vi_ Casset_ Re_rde_
TV INPUl"
TERMINAL
VIDEO OUT AU_I_ O_?
CONNECTING STEREO VCR OR STEREO LASERDISC PLAYER
1. Connect the cable from the VIDEO OUT of the VCR or the laserdisc player to the INPUT (VIDEO) jack on the
TV set below.
2. Connect the cable from the AUDIO OUT R of the VCR or the laserdisc player to the INPUT (AUDIO!R) jack.
3. Connect the cable from the AUDIO OUT L of the VCR or the laserdisc player to the INPUT (AUDIO/L) jack.
4. Press the INPUT button to view the program from the VCR or laserdisc player. The mode VIDEO disappears
automatically after approximately eight seconds.
5. Press the INPUT button to return to the previous channel.
Stereo VCR or Video Disc Player Connection Illustration
NOTE: Completely insert the connection €oid plugs when connect ng to rear panel Jacks The pictur e that played
back will be abnormal if the connection is Ioose_
f you have an S-VHS VCR, use the S- NPUT cab e n p ace of the standard v deo cab e.
Match the numbers below to the diagram for speaker placement and refer to the table for the different surround
sound requirements. (See page 48 for SURROUND functions.)
1 The television's internal speakers.
2 These speakers are connected to a separate audio amplifier. Use the Audio to Hi-Fi output on the TV.