User Guide

- 59 -
Fastext
Your CTV supports the 7 page Teletext sys-
tem. When the page number of any of the 7
pages in memory is entered, the system will
not search for the requested page; instead it
will display the page automatically.
 Press P/CH + button to move the Teletext
screen forward one page at a time.
 Press - P/CH button to move the Teletext
screen backward one page at a time.
For Fastext
The subject-heading for the information may
have a particular colour.
 Press an appropriate Red, Green, Yellow or
Blue button in order to reach the relevant
page quickly.
To exit Teletext
 Press   or   button. The screen will
switch to TV mode.
To Display the Time
 While watching a TV programme with Tele-
text transmission press   button. The
current time information, captured from Tele-
text will be displayed at the upper right of the
screen until the 
,   or M button
pressed.
 If the programme being watched does not
have Teletext transmission, no information
will be displayed.
Peripheral Equipment
Connections
There is a wide range of audio and video
equipment that can be connected to your TV.
Connection diagrams at the and of this sec-
tion show you where the different equipment
should be connected at the back side of the
TV.
PC Sound Connection
 Connect the PC Audio output to the TFT PC
Audio In socket with stereo connection
cable.
 In the main menu select "Feature" using 

or 
 button then enter the Feature menu
pressing 
,   or OK button. Come on
"PC Sound Mode" using 
 or   button
and select PC from the TV, AV-1, AV-2, AV-3
and PC options using 
,   or OK but-
ton.
 Source also should be selected as PC in
the main menu.
Via the Euroconnector
Your TV set has 2 Euroconnector sockets. If
you want to connect peripherals (e.g. video,
decoder, etc.) which have Euroconnectors,
to your TV, use SCART input.
If an external device is connected via Euro-
connector sockets TV is switched to AV
mode automatically. In this case if both
sockets are connected SCART-1 has the
precedence.
In AV mode if you press the 
 button the
TV status OSD is displayed on the screen.
Via Aerial Input
If you want to connect to your TV, peripherals
like video recorders or decoders, but the de-
vice you want to connect does not have
Euroconnector, you should connect it to the
Aerial input of your TV set.
2-ENG-1700W-1547UK-17 INCH TFT-WM-17LD4220.p65 01.12.2004, 14:1959