User Guide
- 51 -
Selecting Band
Band, can be chosen either,
C or S by or button.
Selecting Channel
Channel can be changed by
or but-
ton, by Digit Buttons or by the Double Digit
button with digit buttons.
For band C,
01 - 83, WEST EUROPE.
01 - 76, FRANCE.
For band S,
01 - 41 .
Selecting Standard
Using
or button on Standard, you
can change the standard to B/G, L/L'.
Selecting Search
To start the search process, press
but-
ton for forward search or
button for back-
ward search. If a signal is found or reaches
to end of the band after searching, press
or buttons to continue search pro-
cess. To stop the search process when you
want, press
or buttons again.
Selecting Fine Tuning
You can use the Fine Tuning process for
fine adjustment (after coarse adjustment), if
you are not happy about the image on the
screen.
Use
or button on Fine Tuning item,
until getting the best image on the screen.
Normally the Fine Tuning cursor is placed
next to the left side on the slider and this is
indicated with one arrow.
Setting VCR ( Video Cassette Recorder )
Mode
This item can be seen in TV, AV-1, AV-2, AV-3,
S-VIDEO modes.
If you want to watch a VCR source from one
of these modes, then it will be better to set
VCR mode on. For this, while the cursor is
on this item press the
or buttons to
set it On.
If you want to watch a DVD , then you must
set this item off; because DVD is not a
source like a VCR and to see the best pic-
ture, you must set the VCR mode Off.
To Store Settings
Press OK button on the remote control to
store the settings directly.
or,
Press
, or OK button on Store op-
tion to store Install menu settings.
Installation menu in AV mode is as
follows.
Programme Menu
To enter Programme menu directly, press
the "
" button in TV mode, or
Press "M" button, now you are in main
menu. In the main menu, select Program.
using
or button. Then enter the
Programme menu, press
/ or OK
button.
2-ENG-1700W-1547UK-17 INCH TFT-WM-17LD4220.p65 01.12.2004, 14:1951