User's Manual

8 / 20
1.6 Battery
Reader Unit has a 750mAh Lithium Ion battery.
The battery is charged when USB cable is connected and USB bus power is supplied.
Reader Unit has one Charge LED and indicate charge status.
Important
 The battery charger controls it so that charge current isn’t over USB bus power
specification. Therefore charge time become longer when Reader Unit is power
on than it is power off.
 Battery capacity at the display may not be updated immediately. In that case, it
will be updated after waiting a moment.
 For extending battery cycle life time, charge battery in environment more than 10
degree C if possible.
 If you plan to store the Reader Unit for longer than six months, charge it to 2/3
every six months that remains in storage.
1.7 Rating Label
2. Installation of the Biometric Reader
LED status
Reader Unit status
Remark
Off
Don’t charge or Discharge
Orange
Charging
Orange blink
Battery error
Remove USB cable and stop
using Reader Unit.
Lot Number (6 digit)
Manufacturing Number (7 digit)
MJC26A
0000001