User's Manual

6 / 13
2.2 Connect the USB cable
Connect the USB Mini-B plug of the USB cable to the USB Mini-B connector of the FV Unit.
Connect the plug A of the USB cable to the USB port of your PC.
Attention
Connect the USB plug and the USB connector securely. Hold the plug end when
connecting or disconnecting the USB cable to prevent the connectors from
breaking down.
Important
When connecting the USB cable via a USB hub, check the supply current. The FV
Unit may malfunction with insufficient power supply.
Do not use a USB 1.1 hub for a USB 2.0 PC port, which may cause the FV Unit to
malfunction.
FV Unit may hold some heat due to the use of infra-red rays inside, but this will
not cause malfunctions.
Do not connect more than two FV Units simultaneously to one PC. If multiple FV
Units are connected, they will not work properly.
After connecting the FV Unit to your PC, wait for at least 5 seconds before
performing any operation.
FV Unit
USB Mini-B connector
USB Mini-B plug
USB cable