User's Manual

7
5. Hardware Specifications
Name USB Finger Vein Biometric Scanner
Model PC-KCA100
Finger Size More than 10 mm/0.4” and less than 25 mm/1” *1
Interface USB 2.0
Dimensions Approx. 59mm/2.3”(W) × 82mm/3.2”(D) × 74mm/2.9”(H)
Weight
Approx. 96g/3.4oz (USB cable not included)
Maximum energy supply
DC 5V 500 mA
(Bus powered)
Environment
Conditions
(Operation)
Operating
Temperature
5 to 35 degrees C
(41 to 95 degrees F)
Operating
Humidity
20 to 80％RH
(However do not allow condensation)
Environment
Conditions
(Storage)
Storage Temperature
-10 to 60 degrees C
(14 to 140 degrees F)
Storage
Humidity
20 to 80％Rh
(However, do not allow condensation)
PC Requirements
CPU See “Device Driver and Hitachi Secure BioAPI Runtime
Libraries Installation and Un-installation Manual”
Memory
HDD
Interface *2
Compatible OS
*1: In case of incorrect finger positioning, even with correct finger size, authentication
may fail to be completed.
*2: If possible, connect the FV scanner directly to a PC USB port. If connecting via a
USB hub, use a self-powered hub. When the FV Scanner is disconnected from a USB
port, use the same USB port upon reconnection.