Specification


TECHNICAL SPECIFICATIONS
Item Description
Max Amperage 200 amp w/CO2 gas, 160 amp w/Argon Gas
Cooling Method
A
ir-Cooled
Duty Cycle 35% @ 160 amp
Suggested Wire Size .030, .035
Wire Spool Diameter 4 inch
Wire Speed 0 to 630 IPM
Torch Cable Length 10 ft.
Weight 6 lbs.
KNOW YOUR SPOOL GUN
Description
The Spool Gun is designed to connect to the HIT140/MMIG140 welders only. It is used to feed wires that
are difficult to feed through the standard MIG torch. Most often this is used for aluminum wires, but any
type of wire can be used on 4 inch spools. With the 4 inch spool mounted right on Spool Gun, the
distance the wire has to travel is greatly reduced, resulting in less feeding problems and better overall
welds. The Spool Gun is rated at a 35% Duty Cycle @ 200 amp when using CO2 gas and is rated at
a 35% Duty Cycle @ 160 amp when using Argon gas. This spool gun is capable of running .030 and
.035 wires and is ideal for light fabrication and welding repair. A rugged storage case is included for
portability and safe storage.
