Specification

PAGE 2
P
PSTICK80 FEATURES
The Stick Welder is a DC only inverter stick welder with a smooth stick welding performance. It is
intended for use for welding steel, stainless steel, cast iron and hard surfacing using electrodes from 1/16
inch to 3/32 inch. This unit can also perform lift start DC TIG welding on steel and stainless steel
materials with the optional TIG Torch. (Argon shielding gas along with a regulator, gas hose, and TIG filler
rod would also be required for TIG welding.) The removable quick connect weld cables allow for easy
connection, tear down, and polarity changes. It is designed to weld mild steel and alloys with electrodes
up to 3/32" on materials up to 1/8" thick.
Stick welding gives the operator the flexibility to use this welder for mobile applications, including outdoor
applications. Stick electrodes contain a flux, making welding easy and does not require the use of a separate
shielding gas which can be blown away by the wind in outdoor applications. Since this welder does not use
shielding gas, the operator will not require to have or maintain shielding gas bottles, a regulator or gas hose.
TIG welding does require the use of Argon shielding gas. The shielding gas replaces the flux that is used in
stick welding, providing a more controlled and cosmetic weld. However, TIG welding is limited to areas inside
or where wind can be controlled, preventing the shielding gas from blowing away.
Use on a 20 amp 115V AC circuit without the use of an extension cord. If an extension cord is necessary for
your application, use the appropriate size and length of extension cord to handle 20 amps the entire length of
the extension. Talk with a qualified electrician for cord size recommendations.
TECHNICAL SPECIFICATIONS
Item Description
Power Supply 120V, 25A, 60 HZ, Single Phase
No-Load Voltage 76 Volts DC
Output Range 20 - 80 Amp DC, 90 Amp DC Peak
Duty Cycle 20% @ 80A
Suggested Electrode E6013, E7014, E7018, Stainless Steel
Electrode Diameter 1/16in, 5/64in, 3/32in
Dimensions 12" x 5" x 9"
Weight 9.9 lbs.