User Manual

HistoneHS710Self‐CheckoutterminalsUserManual
 7/12

 
LockedMobile
2. Systeminstallation
The equipment must be installed by technical service personnel or distributors.
★ Requires external power supply has a good grounding, grounding
resistance is less than 0.1 Ω, if there is no grounding or bad power supply. This
will make the shell of the machine charged which will bring a safety hazard to
operators and affect the stable operation of the self-checkout terminals.
★ The equipment is required to be placed where there has a power socket,
network socket or wireless network.
★ Install the machine to the specified location.
★
Install warning light: open the front door lock with the key, insert the
terminal and connecting line from the hole of the warning light to the machine,
and then connect the terminal to the control board of the warning light, and
screw the four screws.