User Manual

HistoneHS710Self‐CheckoutterminalsUserManual
 6/12

Outputvoltagefrequency:50±0.2%;
Loadpowerfactor:0.8/0.9;
Standbytime:5minutesatfullload.
11 Otheroptionalmodules
Externalscanninggun;
FinancialSettlementPOS;
MSRmodule
RFIDcardreadermodule;
EASanti‐theftcoil.
c) Environmental requirements
Operatingvoltage:100~264VAC;
Powerconsumption:average150W,peak250W;
Thebestworkingtemperaturerange:10‐40 ℃;
Optimaloperatinghumidityrange:30‐75%;
Optimumstoragetemperaturerange:‐550 ℃;
Thebeststoragehumidityrange:30‐80%;
Altituderequirements:for2000metersabovesealevelandthe
followingareas.
Ⅲ. Check and installation. 
1. Opentheboxandcheck.
1） Before opening the box, check whether the wooden case is in good
condition, and whether there is any obvious damage. If so, please contact
the logistics or dealer in time to solve the problem；
2） With tools such as screwdriver to open the wooden box, there are 4 foot cup
in the base of HS710 self-checkout which are used as fixed plate to fix the
machine to the wooden pallets before transportation. We must remove the
fixed plate before moving the machine；
3） Lift the machine off the wooden pallet, pay attention to the machine to
avoid bumping and personal safety；
4） Check the attachments including: 4 keys, 8 screws, 1 printer paper shaft, 1
warning light, 1 shopping basket carrier；
5） Check whether the cabinet has obvious scratches, pits or other loss of
appearance；
6） When you need to move the device after checking, You need to raise the
4-foot cup at the bottom of the device so that 4 universal wheels can land,
and then push the device to the desired location