Installation Guide

1
Stage panel
Stage legs
Installation instruction of portable stage 1
2
Accessories are as follows:
Open the stage leg
Pull the four corners out to open the stage legs
3
Installation instruction of portable stage 2
Install the stage panel
If the black plastic pull rod becomes loose due to transportation, you
can align it with the slot and rotate it left and right until it clicks
into the slot on the side of the plastic base, till it does not fall
If the aluminum tube becomes
loose due to transportation,
you can use a screwdriver to
twist the plastic screw plug
again to lock the aluminum
tube
Put it into the stage panel, align the hole of the plastic foot cup
with the spring lock, push the rod to lock the plastic stage base
Push the rod to lock
Press the button to open
4
Installation instruction of portable stage 3
Connect two stages
When the panel lock is closed, connect two
sets of stage boards. When the panel lock is
opened, please use an Allen key to open
The installation is complete!
When the two sets of stages are connected
together, using an Allen wrench to twist the
nuts to open the panel lock and lock the stage
Installation instruction of portable stage