User Manual

Screw the thrusng bar onto the sliding block, you can
choose to install one or all of them, it's up to you
Plug and Play: Just insert the male part in. The KlicLok
system is self-locking designed.
Pull back the ring to release the aachment.
Part2:InstalltheThrustBarandAttachments
1:
2:
Connect the power adapter with the cable box, and make
sure they are fully connected
Connect the speed controller: Please mind the gap on the joint,
you need to match the bulge pin on the cable box, other wise,
you can’t insert it in, even damage your control box
Turn off the switch to make sure it won't in a power-on state
Part 3:ConnectthePowerAdapterandControllerBox
1:
Cable box
2:
Part 4:ASafetyWaytoPlugitintoaWallSocket
1:
Precision Screw
Note：Please connect the longer thrusng bar in the Hismith
logo side, and the shorter one in the other side.
EnglishEnglish
04 05
R
PS：The picture is for reference only.