User's Manual

12
13
USB Operation
1 Insert the USB device.
2 Press the button repeatedly on the unit
or press the SOURCE button on the remote
control to select USB mode.
3 During playback:
- To pause or resume play, press the
/PAIR
button on the remote control.
- To skip to the previous/next file, press the
/ buttons on the remote control.
Tips:
• The unit can support USB devices with up to
32 GB of memory.
• This unit can play MP3/WAV/WMA.
• The unit support FAT32.
Troubleshooting
To keep the warranty valid, never try to repair the
system yourself. If you encounter problems when
using this unit, check the following points before
requesting service.
No power
• Ensure that the AC cord of the apparatus is
properly connected .
• Ensure that there is power at the AC outlet.
• Press standby button to turn the unit on.
Remote control does not work
• Before you press any playback control button,
rst select the correct source.
• Reduce the distance between the remote
control and the unit.
• Insert the battery with its polarities (+/-)
aligned as indicated.
• Replace the battery.
• Aim the remote control directly at the sensor
on the front of the unit.
No sound
- Increase the volume. Press Volume Up on the
remote control or on the soundbar.
- Press MUTE on the remote control to ensure
the soundbar is not muted.
- Press source buttons to select a dierent input
source.
- When using either of the Digital inputs, if there
is no audio:
- Try setting the TV output to PCM or
- Connect directly to your Blu-ray/other source,
some TVs do not pass through digital audio.
- Your TV may be set to variable audio output.
Conrm that the audio output setting is set to
FIXED or STANDARD, not VARIABLE. Consult
your TV’s user manual for more detailed
information.
- If using Bluetooth, ensure that the volume on
your source device is turned up and that the
device is not muted.
I can’t find the Bluetooth name of
this unit on my Bluetooth device for
Bluetooth pairing
• Ensure the Bluetooth function is activated on
your Bluetooth device.
• Ensure you have paired the unit with your
Bluetooth device.
This is a 15 mins power off function,
one of the ERPII standard requirement
for saving power
• When the unit's external input signal
level is too low, the unit will be turned off
automatically in 15 minutes. Please increase
the volume level of your external device.
The subwoofer is idle or the indicator
of subwoofer do not light up.
• Please unplug power cord from the mains
sockect, and plug it in again after 4 minutes to
resent the subwoofer.
14
Specications
Model Name HS218
Soundbar
Power Supply AC100-240V~ 50/60Hz
Power Consumption 30W
Standby Power < 0.5 W
USB port for playback
USB Compatibility
USB Playback support / le formats
5V
500mA
Hi-Speed USB (2.0) / FAT32
32G (max) , MP3/WAV/WMA
Dimension (WxHxD) 37.8 x 2.3 x 3.2 inches / (960 x 58 x 82 mm)
Net weight 4.4 lbs / (2.0 kg)
Audio input sensitivity 500mV
Frequency Response 120Hz - 20KHz
Wireless Specication
Bluetooth Version V 4.2
Bluetooth Maximum power transmitted 5 dBm
Frequency bands 2402 MHz ~ 2480 MHz
2.4G wireless maximum power transmitted 6 dBm
2.4G wireless frequency bands 2400 MHz ~ 2483 MHz
Subwoofer
Power Supply AC100-240V~ 50/60Hz
Power Consumption 30W
Standby Power < 0.5 W
Dimension (WxHxD) 6.7 x 13.5 x 12.3 inches / (170 x 342 x 313 mm)
Net weight 12.1 lbs / (5.5 kg)
Frequency Response 40Hz - 120Hz
Amplier (Outputpower)
Sound bar 120W, 30W x 4 (@10%THD)
Subwoofer 80W (@10%THD)
Total 200W
Remote Control
Distance/Angle 6m / 30°
Battery type AAA (1.5V X 2)