User manual

21
Reverse the door
The side in which the door opens can be
changed from the right side (as supplied) to
the left side, if the installation site
Tools you will need:
1. 8mm socket driver
2. Cross-shaped screwdriver
allows for it.
3. Putty knife or thin-blade screwdriver
2. Use an 8mm spanner to remove the bolts
from the top bracket.
3. Lift the hinge bracket out of the recess in
the door.
4. Remove the pin from the bracket with a
10mm spanner/socket.Replace in the same
hole through the other side.Remove the
door.
5. Lay the Upright Freezer backward.
Remove the bottom hinge bracket using an
8mm socket or spanner.
6. Remove the pin and replace on the
opposite side using a 10mm socket or
spanner. Reattach bottom bracket to the
Upright Freezer.Replace leveling feet. Stand
upright and replace door.
1. Remove the three screws at the rear and
the two screws at the top of the Larder Freezer
and remove the lid.